SG Broadband Community

gRoUnD_zEr0

You have to have a Second IP/Hostname to get 2 comps on the net without using a router

..Costed me $5 more a month

gRoUnD_zEr0

My new Linksys LNE100TX Fast Ethernet Adapter was by far better than my old 3 Com ISA POS...

Lobo
Advanced Member

Registered: Nov 2000
Location: FL
Posts: 6666 ...Scary

gRoUnD_zEr0

I gave a few 56k friends the cable nut adjuster and told them to try out the 56k .ccs files....2 of them reported great speeds, one says he downloads 10k/sec (Doubting this though...) and the other 15k/sec (Doubting this also).......Another friend said he went up to about 5k/sec average (good for ...

gRoUnD_zEr0

Put a rocket engine on a honda civic and find out =P.
He means....do you want to go.....really fast?

gRoUnD_zEr0

With a RWIN sky high, it might have a reverse effect and lag your downloads instead of increasing them.........CPU Speed, Connection and Memorry (RAM) have alot to do with what RWINs will work with your comp/connection........For once that one old Pontiac Grand Prix/Am (Not Sure) which stresses the ...

gRoUnD_zEr0

I was testing during 10-11pm, on all test sites it was reaaaaaaally slow...But today, I got my normal speed back...Wierd. Everythings back to normal now, mods can delete the thread.

gRoUnD_zEr0

Ok, Earlier Today I recieved my new Linksys NIC 1000TX installed it, and got great speeds with it. Around 4-5mbps from http://www.dslreports.com. Tonight, I test it again and get 500kbps!!! What the hell??
I changed RWIN and got:
Test running..........
** Speed 1698(down)/125(up) kbps **
(At least ...

gRoUnD_zEr0

Maybe you should try a lower RWIN? I use, 280320 and get 4mbps with it...It's a little bit better than all those High RWIN's i used to use..Plus you don't have that much RAM nor a Fast processor to handle the higher RWIN values.

Hope I helped

Hehehe..."No workie"

gRoUnD_zEr0

I allocated the 4megs as instructed on the SG page, seems to work pretty well with my Linksys NIC.

To change your avitar -- Goto User CP at the top..Edit Options, and scroll down to the bottom where it says Change avitar.

gRoUnD_zEr0

I'm assuming you have the cable nut adjuster program because I don't know how to do this in regedit. If you don't have the cable nut prog, get it here . You have to set Tcp13230pts to "1" to allow for scaling. And BTW, when you install the cablenut software and open adjuster exe, it erases your ...

gRoUnD_zEr0

cause i no one answered? they just asked me questions

We need to ask you questions about your system specs, OS ect. Unless you want your computer to crash, which is not really fun at all.....If we give you wrong values there is a possibility of your system crashing, would you like this to happen?

gRoUnD_zEr0

Hmmm...Atleast it works...I don't know about the packet loss though, you should try the ping test at pcpitstop here. COpy & paste your results, nothing should be over 200ms. Someone else might have a better RWIN value for you.

gRoUnD_zEr0

I use RWIN of 280320 as you suggested..Works good with my cable, get better results at test sites than with higher RWINS. Thanks Mang

gRoUnD_zEr0

Kastel86 what does the vtcp386 patch do?
The vtcp386 patch lets you change your DefaultRcvValue (RWIN) greater than the one you have set on. Basically, most people think RWINs bigger than that work better. You can find the patch here . Also I would suggest downloading the cablenut program to allow ...

gRoUnD_zEr0

Try this one If that doesn't work, you might have Tcp12330pts set to "0", change it to "1". Try that fix first, reboot and take the test again and see if it works.

gRoUnD_zEr0

our minimum is 384d/l and max 128u/l
Hrrm..If those are your real Caps, than your DSL goes over those caps somehow or they are not in place. You're sure you don't have 1.5mbps dl? If not, great speeds for the buck.

where do i get the 10mb test???
Try here or dslreports to test out your ...

gRoUnD_zEr0

Your RWIN value doesn't look like it was changed by the adjuster. You need the win98 fix which could be found here . It will boost up your RWIN (Default Rcv Value) value to which ever you use with the cable nut program. Restart after each time you change the values. Also if you have @home cable ...

gRoUnD_zEr0

If you have 1.5mbps DSL, thats pretty close to your D/L Cap. My grandpa has ppoe DSL w/earthlink and I don't know what his cap is but I got it tweaked around the same as yours..See what your Download/Upload caps are from your ISP.

gRoUnD_zEr0

Under 100kBytes/sec is really bad. That's only 800kbps as in really slow for cable. There could be something wrong with your pysical cable, you might want to call out a tech to check it out. I get around on average 300kB/sec from good servers, which is about normal for anyone with tweaked cable. I'm ...

gRoUnD_zEr0

Mmm..yeah, on my new comp I have to have USB untill tomorrow when my NIC is supposed to come. The mobo has no ISA slots for my old junker 3com nic, so i had to buy a new Linksys one. USB I get around 1.5-2mbps at dslreports and with the NIC 3-4mbps. A verry significant difference if you ask me.

gRoUnD_zEr0

Those are good speeds...for DSL, If you have cable I would suggest tweaking (unless you already have)..We will need system specs (OS, CPU Speed, RAM) and you will want to download the cable nut software to get started on tweaking. If you have win98 you will need the vctp fix here . Lobo and all the ...

gRoUnD_zEr0

DAAAAAAAAAAAAAAAAAAAAAAAAAAAANNNNNNNNG...Talk about a coincidence...I bought a new processor and mobo for my old junker on Friday, installed it...went to boot and BAM, nothing...I took it to the comp shop (Only after hours and hours of slaving over it trying to get it to boot) to find out that ...

gRoUnD_zEr0

Uhh..Ryan, you're mixing up Bits and Bytes...5mbps (Bits) Is good speed, though not impossible...5mBps as in Bytes/second is absolutely god speed

. As Lobo recommended, You might want to check this out here .

Btw: Old compy is in the graveyard and this new one is nice...I'm back

gRoUnD_zEr0

Your computer specs...OS, Processor speed and how many Megs of RAM you have.

gRoUnD_zEr0

Errr...don't lead us around in circles Kis...You might be getting alot of hopes up

gRoUnD_zEr0

S/He uses some sort of Linksys NIC and says it's far better than the 3Com..I'm bidding on one now on ebay for $2.00

And I just got outbid cause some ass bought 15 of them for $3.25!!! More hunting for a new NIC..

gRoUnD_zEr0

Hurry with the new tweaks

..I can be the beta tester if you want

. Everyone's going to start foaming at the mouth soon if these tweaks really work.

gRoUnD_zEr0

No problem...What are your speeds like now? Faster than before I assume..You might want to post the speedguide TCP/IP Analyzer stuff here so Lobo can get you a better RWIN or someone else for *possible* faster speeds.

gRoUnD_zEr0

He's gonna hog all our bandwidth so we can't download pr0n

gRoUnD_zEr0

Unregistered - You might want to edit your post and remove your IP adress as some people might try to have a little fun with your puter...Also if you have win 98 did you download the patch? It's the vtcp.386 and could be found Here

gRoUnD_zEr0

No problem BigAmp, only here to help

gRoUnD_zEr0

To turn timestamps off set "Tcp13230pts" to 1. If you don't have the cablenut adjuster try it Here . Download, install and try some of the default values cablenut has. Goto file, Open Custom Settings...Goto your cable nut folder, open CCS then cable and try fast_cable2k.ccs. (Save your Registry ...

gRoUnD_zEr0

Evil - If you plan on purchasing a T3 soon, give me access to that bad boy

...We can download pr0n and look at sites with adult content

..Err...anyways, you really gonna get something that fast?!? oc3?

gRoUnD_zEr0

Finally someone new who follows directions exactly...Nice job, your settings look good...How are you Download Speeds and surfing speeds now? It looks like your tweaks worked.

gRoUnD_zEr0

You will want to Download cablenut's softwareHere ..It's easy to use all you got to do is install, open up Adjuster .exe and change your MTU and MSS values, save to registry and reboot...You might want to think of saving a Registry for back up reasons before you start to tweak (If you do).

gRoUnD_zEr0

Those settings really didn't work for me either...But dannyjr hooked me up with some good values, I just had to use a different RWIN and now everythings nice and zippy. This is a big thanks to dannyjr

gRoUnD_zEr0

I lowered it to 254800, but have yet to reboot..I've been reading that 20 page Thread for the past 10 mins

Edit: None of those RWINs and vaules really worked, can you email me what you emailed to cablebump?

gRoUnD_zEr0

cablebumps - You can email me and forward his email if you want to ... xgr0undzerox@home.com

gRoUnD_zEr0

He says it's around 150-300ms which is REALLY crappy for cable...I average about 45ms pings...ALOT of things could be problems on why he gets such bad pings...The servers you play might really suck or have sucky upload speeds or something w/your cable...I wouldn't really know.

gRoUnD_zEr0

Mmm...You're now out of my league...We shall wait for any of the Royal Tweaking Gurus to respond

SG Broadband Community

Search found 79 matches

Starting To Get...Scared...