SG Broadband Community

yikes

Hi Everyone,

What do you all think of the Foxconn 975X7AB-8EKRS2H motherboard?

Thanks in advance,
YiKeS

yikes

Hi,

Im trying to decided between going with a single disk WD raptor (74GB) setup vs dual 7200RPM drives in raid 0. Which will be faster, and provide greater performance? Im also looking for reasonable quiet setup. This machine mainly will be used for gaiming, and im looking for quick load times etc ...

yikes

Hi Everyone,

I'm builidng a new PC (HTPC), and am looking for some recomendations on memory. I do not plan on overclocking but do like to run memory at "Fast" timings. System specs are below;

Motherboard - Intel Desktop Board D975XBX2KR
CPU - Intel E6600
Video card - XFX GeForce 8800 GTX
Memory ...

yikes

interesting... Is the G80 supposed to be much faster?

yikes

Good to see ya posting again Yikes!!!!

The 7950 GX2 is a pretty good card, in some cases sli and crossfire will beat it out, but it holds its own. If your shopping around for a new card now, I'd hold off to see what the new G80 chip is liek from nvidia, its not long till we hear more about it ...

yikes

"AHHHHHHH I see..." said the blind man!

Guess that drives the price up pretty high then. $1000 for a crossfire setup.

Makes the nvidia GX2 setup pretty attractive as its around $550 CAD.

Thanks again,
Nick

yikes

Hi,

I've been having trouble finding some info telling me exactly what ATI crossfile is vs nvidia's GX2 cards (SLI but with one PCI slot)

Is crossfire the same thing? Do I need two crossfire cards to get the same technical setup as the Nvidia GX2 cards.

Particually these cards are in question ...

yikes

Yeah man, viewsonic looks popular, also many of ther review on the web give it decent results commonly 9/10 or better.

Are there any video card (DUAL DVI) out there for a reasonable price that would give better performance than my 9700pro? WIthout going to a 6800 and spending $500 more :)

Thanks ...

yikes

New OPTION(s)

SINGLE DELL UltraSharp 2405FPW 24-inch
or
SINGLE DELL UltraSharp 2005FPW 20-inch

And then add a second down the road when I can afford it.

YiKeS

yikes

Yeah I've heard many issues related to backlighting etc.. with the Dell's but there RMA support is decent so it may be a non issue. I saw the Viewsonics in my local store and they look slick while the dell....well its a dell

YiKeS

yikes

Hi everyone,

Im looking at getting going with a dual monitor LCD (DVI) setup. I would prefer 19" or bigger and also need a video card (AGP) to drive the dual DVI monitors (this can come later though, already have a 9700 pro dvi/vga). I would like to spend less than $800 American, $1000 or so of my ...

yikes

CoolJ,

YeOldeStonecat is on the right track. Hubs do not support the spanning tree protocol and there for can cannot participate in anything that spanning-tree does. i.e root selection, layer 2 loop protection, vlan segrigation etc...

YiKeS

yikes

yikes

Hi All,

I've got a Retail box Intel P4 2.53Ghz chip with retail heatsink and Asus P4S533 Motherboard for sale or trade. For trade I am intersted in P4 C series or above CPU or AMD 3200+ or greater CPU, but as usual im open to all offers 4 trade

Or buy them both for $230 Currently I am not parting ...

yikes

The new power supply was worth it guys, just for the sata power connectors, plus the old 400watt, was nothing special...some generic brand. Also, the new enermax has a fan controller for its dual fans which is nice.

YiKeS

yikes

<<<<<<---- El-cheapo

do it.......... dont do it........ aarrrrghhhh........I hate spending money.

I just bought a 350watt 24pin enermax. Seems to be working good cost me 80$ canadian.

Thanks for the advice peeps. Oh and just so everyone knows I did try plugging the 20pin in the 24pin MB ...

yikes

castle555, im assuming you have CLI access to the box as well as enable level privledges. To get the dhcp pool name and there stats you would use the following comman.

router# show ip dhcp database

This command will give you the address pool name, DNS servers, net bios servers, and/or any other ...

yikes

1668,

Are you trying to connect to your companies VPN? Or are you trying to connect to your Home network VPN, through your Companies internet access. Im not following exactly what your trying to do, but anyhow....

Suggestion 1
Lets assume you are trying to connect to your home network through a ...

yikes

chugger93,

congrats on getting it to work, im glad the config samples i posted above worked, and that I could help you out. If you ever need assistance with cisco gear, dont hesitate to ask.

There should be no need for access-lists to forward ports as you reqeusted. Access-lists are used to block ...

yikes

Yeah you are doing a 1 - MANY NAT, the "overload" sets this up otherwise its a 1-1. Now for port forwarding its super simple here is the syntax and an example;

router# ip nat inside source static " protocol " " inside IP " " inside port# " interface " interface type and # " " outsideport# "

So if ...

yikes

Loonatic,

I had the same prob for 3 months, i tried everything I eventually just threw it away. I know that doesnt help you, but they are not enterprise class electronics and only last so long.

Tosser is my suggestion.

YiKeS

yikes

Aagiants im assuming you have a home router like a linksys or dlink etc... if so they actaully 90% of the time will have a switch built in so you wont need a hub.

You will just need independant connections off the switch/router to each location where you would like a jack.

Regards,
YikeS

yikes

Milwbr821 for this to work correctly you will need to configure fastethernet2/0 of the router to belong to the same network as the bridge, and then config a default gateway on the 3640, and finally a DNS entry on your laptop.

Here are the commands

#conf terminal
#interface fa2/0
#no ip address 192 ...

yikes

That reg entry is the QOS packet scheduler value, in the case you have shown with a value of "0" there is no reserve bandwidth(or QOS is disabled). I believe the default is 20%.

Regards,
YiKeS

yikes

Hey all I've just purchased a new MB and PCI-E video card to go with it.

MB = ASUS P5GD1
Video Card = MSI 6600GT PCI-E

Problem being is my power supply wont hook up to the board. The board has a 24pin connector while my PS has only 20pin. I found on the web that ther are 20-24pin converters ...

yikes

gooboo, can you post a windows task manager screen shot of the processes..it will help to decipher those items included in the "system" part of your existing screen shot.

YiKeS

yikes

Pretty slow for a mustang if you ask me. Those coppers kept catching up to him. WTF is with that?

yikes

Provide wireless, and charge your users upon checkin for a flat fee, per day

Secure it via a WEP key and your done.

YiKeS

yikes

4 things to try....

1. reboot

2. ipconfig /release ..../renew
3. services.msc make sure dhcp client service is running.
4. try a new NIC to isolate hardware

YikeS

yikes

Gort9k,

The easiest way to solve your problem, is to build a static routing table, pointing only traffic destined for the security network or server out of the one gateway (nic), and then make the other interface your default gateway or default static route.

If you need help configuring static ...

yikes

Center, you can limit to bandwidth to whatever value you would like. The numbers work out as follows.

under the policy-map
police 56000 7000 exceed-action drop

apply the policy map to the connected interface feeding the wireless AP.

YiKeS

yikes

Hi Center,

If you are going to use the Cisco 2950 is it possible, to shape bandwidth. All you will need to do is perform some traffic shapping. To do this use the following configuration;

switch#conf t
class-map match-any all_traffic
match ip any any
exit

policy-map workstation_1mbps
class all ...

yikes

Got it thanks for the advice guys.

Thanks,
YiKeS

yikes

Hey all,

I've got an other pc here on site, and I'm pretty sure its the HD, have swapped out with another and lock ups go away. But I want to be 100%, is there any free software out there that will tell me if the HD is fubard?

Thanks,
YiKeS

yikes

You can get the Canon 300D (D-rebel) with two Kit lens's for a lot cheaper than the 10D.

yikes

Thought about a DSLR? like the Canon 10D, D-rebel, or Nikon D70?

YiKeS

yikes

Those things are cool, I'd never have to worry about not having supper ready when I come home from work anymore. Where do we buy em?

YiKeS

btw. the one on the right is outta sync

yikes

Its pc 2100 2x256mb. I dont want to open the package if I cant.

Thanks,
YiKeS

yikes

Looks like my GF.

yikes

Was a interesting series, I cant wait for Philly. Were gonna shut em down

Gotta love Eddy, he rocked.

YiKeS

SG Broadband Community

Search found 1174 matches

Foxconn 975X7AB-8EKRS2H...What do you guys/gals think?

Raid 0 vs raptor

What memory do I want? system specs inside

Crossfire vs Nvidia SLI/GX2 video cards

help me choose, dual monitor LCD (DVI) setup...

FS/FT: P4 2.53GHz & Asus P4S533 $230 OBO Canadian $

EATX power connector WTH? should I use 20-24pin converter or get new PS?

I need some free HD testing software... Any suggestions?

can i run ecc memory in a non-ecc motherboard?