SG Broadband Community

kinkymaster

Philip............?

Mcoffee needs a defragment or he has a bug !!!

kinkymaster

Nice description there Philip, now everyone can test values that can understand the meaning.
Anyway 136... " sounds good " like the " last cherry on a pie "

kinkymaster

oups............ wrong information !

kinkymaster

I agree pal, thats why i use 80 and not 92 that is supposes to be "best performance"

kinkymaster

I stole an information today from somewhere.............

HAPPY BIRTHDAY !!!

kinkymaster

if u re using cfosspeed(whatever) i think that u dont have to put in the optimizer the TOS values because that program changes the TOS "on air"
otherwise u can just put the exacts values that mcoffee gaves u (I mean exactly), get a speed test and if u are not "happy" with the results, post here an ...

kinkymaster

Hi trogers,

If 136 seems to work fine with u, try also to test 144(100 100 00) which uses the same priority with the 136 value(flash override), but "tweaking" the delay bit and not the throughput bit, which anyway is tweaked (enough to u ..... i think)
Try also 132 value that it has again the same ...

kinkymaster

Hello everybody,

My opinion Philip is that enerything above 'immediate priority', is more than enough.
Im using 010... 00 for priority and everything works fine even with ''rough access sites''.
So, my recommendation for this tweak are values around 72(010 010 00), and 80(010 100 00) but everyone ...

kinkymaster

Is this something that is recommended for SP2 users??? I've never heard of this "tweak" before. Will it make a difference? Thanks.

i want to know. what does this do? and why should it be necessary?

xp sp2 limits the TCP simultaneous connections to 10/sec. This patch change the limit to 50 ...

kinkymaster

Did u read the article ?

kinkymaster

Also, for SP2, it is necessary to do this

kinkymaster

kinkymaster wrote:May be completly out of Piranxa's first point, but i also have a question about cablenut :

How calculates the rwin value?

Remember me? ]Do you just make up your own formula?[/quote]

cool Doc

kinkymaster

I am talking about tcpreceive and global, sorry, my mistake

kinkymaster

May be completly out of Piranxa's first point, but i also have a question about cablenut :

How calculates the rwin value?

kinkymaster

...........you're probably thinking of the "sliding windows" nature of the TCP window during transfers.

Thnx & sorry if u misunderstood me cause of my bad english. :thumb:

Anyway Piranha, if u have to edit the right rwin number my proposal is not to read any analyzer around the world, but just ...

kinkymaster

I think the right way would be, why the analyzer reads different tcp window size than the one i have in my com's registry?

Because of your different latency is the answer. If you are calculating your RWIN pinging your ISP server, the only way to read the same tcp window size with the one you have ...

kinkymaster

The only registry tweak for upload, that i have tested and gives a little boost is this :

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD\Parameters
Make a DWORD and name it: DefaultSendWindow and give the value= 800 x 1024/8 = 102400 (Decimal)

Also cablenut includes that option. Get from ...

kinkymaster

My ISP's web proxy changes MTU to 1484 but I still tweak my settings to follow MTU 1492 as this is the max packet size my comp can send out and receive.

I suspect your MTU value is restricted by your router and you will need to access into it to reset the MTU value: 1500 for Cable and 1492 for ...

kinkymaster

1) Propably your winsock is corrupted ( that hurts

). Did u notice that, after deleting tracks of ad-ware, spybot or other antispy-soft?

2) did u stop any services ? if yes......... try to remember.........

kinkymaster

Hi guys..........

Trogers............

First i think that you have to unlock your driver MTU, where propably (USB modems) must be in :

HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E972-E325-11CE-BFC1-08002bE10318}\000n......... n= 0 to 9 (search for yours) and then change it, in the ...

kinkymaster

geia soy filarako.......... kai egw hol exw, alla min anisixeis, apla i hol kleidwnei to MTU tis sta 1452 kai esi enw to bazeis 1500 sta analyser sou bgazei 1452.
An thes kapoia boitheia gia na stiseis kala tin grammi sou........ pes mou.

kinkymaster

That was very helpful for me

kinkymaster

See below window ( i dont know how to delete this window

)

kinkymaster

Kalispera filaraki....... pistebw eisai apo ta meri mas apo oti blepw........ pes mou ti sindesi exeis?

kinkymaster

read this article. itis helpful

http://www.speedguide.net/read_articles.php?id=1607

kinkymaster

thnx,

I'll try these values

kinkymaster

No i cant increase MTU. May be its locked by ISP because i cant even find it in registry. How can this happen? i have tweaked manually the registry with enough values. My problem is that tcpoptimizer, whenever i have used it, deletes the MTU value from ndiswan registry entry and make the connection ...

kinkymaster

ok!

TCP options string = 02040584

MTU = 1452
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be limiting your MTU regardless of Registry settings.

MSS = 1412
MSS is not optimized for broadband. Consider ...

kinkymaster

ill bring to u his analyzer as soon as possible !!!

kinkymaster

i agree with u......... this is the correct value........ 128 x 1024/8 = 16384, but it does not work at this pc. I think that, it is his ISP problem.
Please give me the best values for cablenut so i can test . Im afraid that i will break the download speed with cablenut but.......... anyway. :D ...

kinkymaster

I prefer not 2 use this soft.......... is this value written in registry under tcp - parameters ?

thnx

kinkymaster

hello guys,

i have tweaked a friend of mine pc ( 384k/128k dsl, modem is netroute/ethernet ), and i get 99% of download average speed, but his upload speed, uses about 60 - 70% of bandwidth. that was a problem from the beggining. Any ideas and suggestions?

thnx

kinkymaster

a) u have to know that usb and ethernet are completly different protocols and the only way to connect its other is under SPG adapter ( pulse generator ), to set tha same black burst (synchonization pulse) for the two 2 devices. u hooked up them how?

b) your usb controller is non updated and some ...

kinkymaster

hello,

try some speed tests before and after installing. An easy one access is http://www.speakeasy.net, or find another site which is closer to your base. Good luck and have fun

kinkymaster

hello,

check in event viewer if u have conflicts in adress (I/O) or IRQs, even the status near, says ok.If u have same IRQ with other device may be u have some power off problems some times. try to change irq if possible. If adress is confict may cause your winsock broken. That damage hurts.
check ...

kinkymaster

So did that to me and i was argue with him

and with all site , that tcp optimizer is not working,

Mcoffee........ bad boy

kinkymaster

try those two tips, may help you,

Goto the device manager - usb controllers - right klik to the one of your controllers - advance - uncheck " dont tell me about usb errors".
below to the usb root hub.... check that the power does not limit the 500ma when u plug the x-box or other device and also ...

kinkymaster

Hello ace,

It can happen if some bad factors are taking place.
Take a small view at following site

http://www.microsoft.com/technet/prodte ... 21675.mspx

kinkymaster

welcome to cyberworld my friend,

I think that your modem does not initialize the usb bandwidth. this is an auto detect examination and u cant interfere manually. Give us the following informations.

- Have u tried to tuneup your modem manually?
- What is your connection bandwidth?
- goto start ...

kinkymaster

Maybe the following site, will help u decide, which is the best....

http://www.firewallleaktester.com/tests.htm

SG Broadband Community

Search found 72 matches

Psit? mcoffee........?

help tweak upload.... !!!