ZyXEL's MAX218M2W supports state-of-the-art WiMAX technologies such as Maximum Ratio Combining (MRC), MIMO Matrix A and B and beamforming that enable superior radio performance and extensive radio coverage, while the adaptive Tx Diversity improves the uplink performance.
The MAX218M2W provides both TR-069 and OMA-DM functionalities for Over-the-Air (OTA) remote management and software upgrades. These features can effectively reduce the operating cost.
The MAX218M2W supports SIP (RFC3261)-based VoIP signaling suitable for IP telephony service deployments, while sophisticated voice compression and QoS mechanisms provide high-quality voice communications.
| MAX218M2W Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 3G/4G/5G built-in |
| LAN ports: | 2 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| RJ-11 FXS VoIP phone ports: | 2 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| VoIP | |
| VoIP Protocols: |
SIP v2 (RFC 3261) SDP (RFC 2327) RTP / RTCP (RFCs 1889/1890) T.38 (Fax over IP) |
| VoIP Audio Codecs: |
G.711 (PCM) G.729 (a/b) |
| VoIP Voice Features: |
Echo Cancellation (G.165/G.168) Adaptive Jitter Buffer Caller ID Call waiting Call transfer Call forward Speed Dialing Voice Activity Detection (VAD) Comfort Noise Generator (CNG) |
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: | Access point |
| Transmit Power: | +14 dBm |
| Receiver Sensitivity: | -71 dBm |
| WPS (Wi-Fi Protected Setup): |
|
| WiMAX: | IEEE 802.16e-2005 SOFDMA / TDD |
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP server: |
|
| L2TP client: |
|
| PPTP | |
| PPTP server: |
|
| PPTP client: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | keyword/content filtering |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | 1234 |
| Administration: |
Web-based (LAN) Telnet / CLI SSH |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| NTP client: |
|
| Links | |
| Product page: | http://www.zyxel.com/products_services/m... |
| Datasheet: | ftp://ftp.zyxel.com/MAX218M2W/datasheet/... |
| Manual: | ftp://ftp.zyxel.com/MAX218M2W/user_guide... |
| Quick Install Guide: | ftp://ftp.zyxel.com/MAX218M2W/quick_star... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|