The unit has a built-in 2400mAh rechargeable battery, and supports auto APN, allowing for an automatic dial-up/3G/4G connection without any preset profiles. The router can supply power from its battery to electronic products connected via USB as well.
| WNR1011 Features | |
| General | |
| Availability: | discontinued |
| Warranty: | 1 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 one RJ-45 WAN port |
| WAN port(s) type: | 3G/4G USB port |
| USB port(s): |
1 |
| USB port type: | USB 2.0 |
| Router | |
| NAT routing: |
 |
| Multihomed: |
|
| DHCP server: |
|
| DHCP client: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: | Access point |
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.123.254 |
| Default admin username: | admin |
| Default admin password: | password |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Misc hardware info | |
| USB power cable: |
|
| Links | |
| Product page: | https://prolink2u.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
Razi - 2012-08-06 10:43
Hi
wnr1011. would like to know how to connect to wifi. unable to connect to wifi. No signal for wifi on the router. already reset but still can't connect to wifi. Still no display. Please advice
Hi,
I spent the whole night configuring this 3G mobile WiFi router. Finally got it running and still testing. I recommend to perform a firmware upgrade, after the upgrade, perform a factory defaults reset. The firmware upgrade took at least 15mins. My first attempt was unsuccessful and only managed to get through after the 2nd attempt. Really needs lots of patience :). If it still gives me problem, I shall demand to exchange for the TPLink one from SLS and never ever buy any product from Prolink again. In the past, my friend did warn me about getting products from Prolink, I should have listened to his advise.
it just suck !! for 8months it worked fine now it doesn't connect at all.and agent in sri lanka is not good at all when I complained them they just took it and upgraded my software and gave but problem continue .Will never buy again any kind of prolink products .poor customer support.don't spend money on this.It can only connect 3-5 devices max.
I totally agree with all of you. Prolink products especially 4G Wireless-N Mobile Router is a piece of junk.
|
|
|