The integrated AP is WDS compatible. It uses WMM (QoS) to prioritize the traffic over the network. A WPS button allows for easy wireless security configuration.
The router provides VPN pass-through for IPSec, L2TP and PPTP. It has a built-in SPI firewall to protect the network against malicious attacks. The router's configuration is easy, using the Web-based configuration utility.
| PWH2004 Features | |
| General | |
| Availability: | discontinued |
| Street price: |
$63 |
| LAN / WAN Connectivity | |
| WAN ports: |
1 one USB port for 3.5G USB modem |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| USB port(s): |
1 for 3.5G USB modem |
| USB port type: | USB 2.0 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: |
Access point Wireless bridge (PtP) Repeater mode |
| external antenna(s): | 2 |
| Antenna connector: | RP-SMA (Reverse SMA) |
| Antenna gain: | 2 dBi |
| Transmit Power: | +14 dBm |
| Receiver Sensitivity: | -72 dBm |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| Device Management | |
| Default IP address: | 192.168.123.254 |
| Default admin username: | admin |
| Default admin password: | password |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| NTP client: |
|
| Links | |
| Product page: | https://prolink2u.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
Sally - 2011-10-18 02:09
Hi, I got this Prolink PWH2004 product. My question it i can't connect it to wireless. As the wireless light no show. And key in the http://192.168.123.256 it still can't connect and i can't do and change the setting at all.... it they any solution
You may have to connect to it via the RJ45 port, and set your client to the same subnet as the AP to configure it. For additional help, please use our forums.
Tryed to use PWH 2004 for PPTP. No success. There's no PPTP option available.
How do we manage and control the bandwidth per person using?
can i use to a dedicated static IP. with vpn. And can i I use as vpn Client and sever Router.
There is no vci and vpi in pwh2004 for prolink.
|
|
|