This router is compatible with UMTS/HSDPA/EV-DO/3G/Next G/PCMCIA Cards.
The integrated AP complies with IEEE 802.11b/g standards, providing wireless transmission speeds of up to 54Mbps. It supports WEP and WPA/WPA2 wireless encryption.
The router provides VPN pass-through for IPSec, L2TP and PPTP. It features a built-in SPI firewall to protect the network against hackers and Denial of Service (DoS) attacks.
| N3G001W Features | |
| General | |
| Availability: | discontinued |
| Street price: |
$179 |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) |
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) Wireless MAC Address filtering |
| WiFi modes: | Access point |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna gain: | 2 dBi |
| Transmit Power: | +14 dBm |
| Receiver Sensitivity: | -72 dBm |
| Default SSID: | default |
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, packet filtering |
| Device Management | |
| Default IP address: | 192.168.123.254 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Email alerts: |
|
| Event log: |
|
| Misc hardware info | |
| Chipset: | AMRISC20000 |
| RAM: | 32 Mb |
| Flash Memory: | 4 Mb |
| SNMP support: | SNMP v.2 |
| Links | |
| Product page: | http://www.netcommwireless.com/ |
| Datasheet: | http://media.netcomm.com.au/public/asset... |
| Manual: | http://media.netcomm.com.au/public/asset... |
| Quick Install Guide: | http://media.netcomm.com.au/public/asset... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|