It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack. It also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
| RBmAP2n Features | |
| General | |
| Availability: | currently available |
| List price: | $45 |
| LAN / WAN Connectivity | |
| WAN ports: |
0 one USB port for 3G/4G USB modem |
| LAN ports: | 2 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
1 for power supply or 3G/4G USB modem |
| USB port type: | USB 2.0 |
| Router | |
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point |
| internal antenna(s): | 1 |
| Antenna gain: | 1 dBi |
| Transmit Power: | +11 dBm |
| Receiver Sensitivity: | -73 dBm |
| Default SSID: | MikroTik |
| Device Management | |
| Default IP address: | 192.168.88.1 |
| Default admin username: | admin |
| Default admin password: | n/a |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Misc hardware info | |
| Chipset: | AR9331-AL1A, 400Mhz |
| RAM: | 64 Mb |
| Flash Memory: | 16 Mb |
| Power over Ethernet (PoE): |
|
| USB power cable: |
|
| Links | |
| Product page: | http://routerboard.com/RBmAP2n |
| Datasheet: | http://www.speedguide.net/images/hardwar... |
| Quick Install Guide: | http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|