Enable a wireless network in a reliable, intelligent and SNMP managed way for your small business. The intuitive webbased interface allows you to easily set up the features of the WRV200. SNMP gives you the ability to remotely manage and monitor the device.
The VPN router gives your business multiple SSID and VLANs for traffic separation and enhanced QOS funtionality for improved quality voice/video. With support for Wireless QoS (WMM) and wired QoS (port prioritization), consistent voice and video quality is maintained throughout your business.
| WRV200 Features | |
| General | |
| Availability: | discontinued |
| Street price: |
$72 |
| Warranty: | 3 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| USB port(s): |
0 |
| Router | |
| NAT routing: |
 |
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| MAC Address clone: |
|
| MTU configurable (WAN): |
|
| MTU limit (WAN): | 1500 |
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) |
| DSL | |
| PPPoE client: |
|
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11g MIMO |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Repeater mode |
| internal antenna(s): | 0 |
| external antenna(s): | 2 |
| Antenna gain: | 2 dBi |
| Transmit Power: | +11 dBm |
| Receiver Sensitivity: | 11 dBm |
| Default SSID: | linksys |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| VPN | |
| VPN Authentication: | MD5 (128-bit), SHA1 (160-bit) |
| VPN Encryption: | 3DES (168-bit), AES (128-bit) |
| RADIUS support: |
|
| IPSec | |
| IPSec client: |
|
| IPSec passthrough: |
|
| IPSec simultaneous tunnels: | 10 |
| IPSec throughput: | 30 Mbps |
| L2TP | |
| L2TP server: |
|
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Security log: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering, date/time scheduling, Proxy, Java, ActiveX, Cookie |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard TFTP (RFC 1350) |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.1, SNMP v.2 |
| Links | |
| Product page: | http://www.cisco.com/en/US/products/ps99... |
| Datasheet: | http://www.cisco.com/en/US/prod/collater... |
| Manual: | http://www.cisco.com/en/US/docs/routers/... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
piter - 2007-10-09 06:58
We have very nice VPN for a very low price, but this router has many bugs.
First The QoS in this router is a joke. It`s not working as It suppose to work, maybe the port base QoS will work, I haven`t checked it yet, but the percent QoS is not working. Second the big problem is with stop working FTP,ICQ and few other protocols. With a non official firmware 1.34 we can do port triggering for example, we need to say that port 21 FTP is port 21 FTP, and then It starts to work, but this is not the way it should be. The GUI sometimes is not responding. We can see the white page, and that`s all. Of course, after restart everything is all right, but imagine, that this is our branch router, and we are for example 1000 miles from there and we have VPN connection(which is working very nice what I said before), and we need to change few things. GUI is not responding, and we have a big problem. If you want just only VPN connection, it`s good, but if you want it for few other functions in your network, I can say that we can buy sth better for this price.
I have on of these, with lateist FW and its utter CRAP.
Dont get one... get something better.. Like a netgear or dlink, not this waste of space..
I agree stay away from this thing, I have had nothing but trouble with it.
Just a piece of crap, I have 3 of these, sent back to our supplier, support 5 VLANs ? s&%t, waste of time, stay away from this router
Hi everyone,
I have a big network setup using this router, working great!! It is reliable (working for years without any problem) Even qucik VPN is working nice (on Windows XP only, I have a problem with Vista). You need to setup correctly for QOS to work, it's working for me.
This was my last Lynksys router or any product they make !!!! always problems ! what a crap! Don't waste your time with this product.
|
|
|