This access point can act as a DHCP client and offers PoE capabilities. It supports multiple SSIDs, WEP and WPA/WPA2 wireless encryption and 802.1x authentication. You can configure the access point via Web-based configuration utility or via SNMP v.1/v.2.
| WAP54GP Features | |
| General | |
| Availability: | discontinued |
| Street price: |
$299 |
| Warranty: | 3 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| USB port(s): |
0 |
| Serial port: |
 |
| Router | |
| Multihomed: |
|
| DHCP server: |
|
| DHCP client: |
 |
| Routing Protocols: | VLAN tagging (802.1q) |
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| internal antenna(s): | 0 |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: | RP-SMA (Reverse SMA) |
| Transmit Power: | +14 dBm |
| Receiver Sensitivity: | -69 dBm |
| Multiple SSID: |
|
| Firewall | |
| Security log: |
|
| Device Management | |
| Default IP address: | 192.168.1.245 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) SSL secure web |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Email alerts: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.1, SNMP v.2 |
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | https://www.linksys.com/us/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
Booger - 2006-09-06 00:49
Make sure to download the 1.28 firmware from the Linksys website to enable roaming across multiple AP's. We wasted a whole day trying to find a fix. 1.24 has a bug that makes you wait 15 minutes to reattach once you shift AP's. 1.28 seems to be OK for the roaming...
|
|
|