With a transmit power of 500mW and network speeds of up to 300mbps, the HWREN2 Pro, not only doubles your Wi-Fi network coverage, but its performance is three times stronger than any standard wireless repeater or extender on the market. It eliminates wireless deadspots and strengthens unstable connections for long range applications.
The extender allows up to 5 wired devices to connect and share an internet connection.
| HWREN2 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 5 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP server: |
|
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: | Repeater mode |
| external antenna(s): | 2 |
| Antenna gain: | 3 dBi |
| Transmit Power: | +23 dBm |
| Receiver Sensitivity: | -78 dBm |
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Default IP address: | 192.168.1.240 |
| Default admin username: | admin |
| Default admin password: | 1234 |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Misc hardware info | |
| RAM: | 16 Mb |
| Flash Memory: | 2 Mb |
| Links | |
| Product page: | http://hawkingtech.com/products/hi-gain_... |
| Datasheet: | http://www.speedguide.net/images/hardwar... |
| Manual: | http://www.speedguide.net/images/hardwar... |
| Quick Install Guide: | http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|