modes.
The integrated access point complies with IEEE 802.11b/g standarts, providing wireless transmission speeds of up to 54Mbps. It supports WEP and WPA wireless encryption. The ECB-1220R uses WMM (QoS) to prioritize the traffic over the network.
This router provides VPN pass-through for IPSec, L2TP and PPTP. It features a built-in firewall to protect the network against Denial of Service (DoS) attacks. It can be easily configured via Web-based configuration utility, including a Quick Setup Wizard.
| ECB-1220R Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Routing Protocols: | RIP v2 (dynamic routing, RFC1389) |
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| external antenna(s): | 1 |
| Antenna connector: | RP-SMA (Reverse SMA) |
| Antenna gain: | 2 dBi |
| Transmit Power: | +17 dBm |
| Receiver Sensitivity: | -68 dBm |
| WDS compatible: |
|
| WMM (QoS): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Device Management | |
| Default IP address: | 192.168.1.2 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| Chipset: | Realtek RTL8186 |
| RAM: | 16 Mb |
| Flash Memory: | 4 Mb |
| SNMP support: | SNMP v.1, SNMP v.2 |
| NTP client: |
|
| Links | |
| Product page: | http://www.senao.com/English/Default.asp... |
| Datasheet: | http://www.senao.com/images/www.senao.co... |
| Manual: | http://www.senao.com/images/www.senao.co... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|