|
![Cisco](/images/hardware/_logos/cisco.gif) |
Cisco WRVS4400N
|
details: | Wireless-N Gigabit Security Router with VPN |
hardware type: | Wireless Router |
date added: | 2007-10-17 |
updated: | 2012-08-21 |
The Linksys/Cisco WRVS4400N implements draft 802.11n (Wireless-N) technology with a Virtual Private Network (VPN) Router that features a built-in 4-port full-duplex 10/100/1000 Gigabit Ethernet switch.
By overlaying the signals of multiple radios, Wireless-N's "Multiple In, Multiple Out" (MIMO) technology multiplies the effective data rate resulting in greater throughput and coverage over 802.11g. Unlike ordinary wireless networking technologies that are confused by signal reflections, MIMO actually uses these reflections to increase the range and reduce "dead spots" in the wireless coverage area. At the same time, Wireless-N is backwards compatible with Wireless-B and -G devices.
WRVS4400N Features |
General
|
Availability: |
currently available
|
Street price: |
$189 |
Warranty: |
3 year(s) |
LAN / WAN Connectivity
|
WAN ports: |
1 |
WAN port(s) type: |
Gigabit Ethernet (RJ-45)
|
LAN ports: |
4 |
LAN ports type: |
Gigabit Ethernet (RJ-45)
|
USB port(s): |
0 |
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
Port forwarding of ranges: |
|
Port triggering: |
|
DHCP server: |
|
DHCP client: |
|
DHCP relay: |
|
DNS proxy: |
|
Dynamic DNS client: |
|
QoS: |
|
UPnP: |
|
MAC Address clone: |
|
Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389)
|
DSL
|
PPPoE client: |
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) RADIUS authentication SSID Broadcast disable
|
WiFi modes: |
Access point
|
internal antenna(s): |
0 |
external antenna(s): |
3 |
ext antenna(s) removable ?: |
|
Antenna gain: |
2 dBi |
Default SSID: |
linksys-n |
WMM (QoS): |
|
VPN
|
VPN Authentication: |
MD5 (128-bit), SHA1 (160-bit), IKE (IPSec) Key Management
|
VPN Encryption: |
3DES (168-bit)
|
RADIUS support: |
|
|
IPSec |
IPSec passthrough: |
|
|
L2TP |
L2TP server: |
|
L2TP passthrough: |
|
|
PPTP |
PPTP server: |
|
PPTP passthrough: |
|
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Security log: |
|
Filtering: |
Domain/URL blocking, keyword/content filtering, date/time scheduling, Proxy, Java, ActiveX, Cookie
|
Device Management
|
Default IP address: |
192.168.1.1 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard Remote centralized management
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Email alerts: |
|
Event log: |
|
Diagnostic functions: |
|
Misc hardware info
|
SNMP support: |
SNMP v.1, SNMP v.2
|
NTP client: |
|
Links
|
Product page: |
http://www.cisco.com/en/US/products/ps99... |
Datasheet: |
http://www.cisco.com/en/US/prod/collater... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|