|
 |
Billion BiPAC 7402GX
|
details: | 3G/ADSL2+ 802.11g Wireless VPN Firewall Router with USB 2.0 port |
hardware type: | DSL Wireless Router |
date added: | 2012-11-27 |
updated: | 2013-05-26 |
The BiPAC 7402GX allows you to connect a 3G/HSDPA USB modem to its built-in USB port, enabling you to use a 3G/HSDPA, UMTS, EDGE, GPRS, or GSM Internet connection, with possible downstream rates of up to 14.4Mbps.
Wired connections can benefit from the ADSL2+ standard's flexibility, offering download speeds of up to 24Mbps using a standard telephone connection, while wireless connections profit from download speeds up to 14.4Mbps delivered via 3G/HSDPA, EDGE, UMTS or GPRS networks.
The BiPAC 7402GX is equipped with a built-in 4-port full-duplex 10/100 Switch to allow easy connecting of other wired-Ethernet devices.
An integrated 802.11g Wireless Access Point offers quick and easy access with data encryption for added security. Wireless Protected Access (WPA-PSK/WPA2-PSK) and Wireless Encryption Protocol (WEP) support ensures high-level data protection and WLAN access control.
The BiPAC 7402GX supports embedded IPSec VPN (Virtual Private Network) protocols, allowing users to establish encrypted private connections of up to 16 simultaneous tunnels over the Internet. With a built-in DES/3DES VPN accelerator, the router enhances IPSec VPN performance significantly and ensures that data is transmitted securely between two or more sites.
BiPAC 7402GX Features |
General
|
Availability: |
discontinued
|
LAN / WAN Connectivity
|
WAN throughput: |
24 Mbps |
WAN ports: |
1 one USB port for 3G USB modem |
WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
LAN ports: |
4 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
USB port(s): |
1 for 3G USB modem |
USB port type: |
USB 2.0
|
Auto-failover connection: |
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
DHCP server: |
|
DHCP client: |
|
DHCP relay: |
|
Dynamic DNS client: |
|
QoS: |
|
ToS / DiffServ: |
|
UPnP: |
|
Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) VLAN tagging (802.1q) IGMP Multicast (RFC 1112)
|
DSL
|
DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) ADSL2+M (G.992.5 Annex M)
|
PPPoE client: |
|
PPPoA client: |
|
Wireless
|
Maximum Wireless Speed: |
54 Mbps
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES)
|
WiFi modes: |
Access point Repeater mode
|
WDS compatible: |
|
WPS (Wi-Fi Protected Setup): |
|
VPN
|
VPN Authentication: |
IKE (IPSec) Key Management
|
VPN Encryption: |
DES (56-bit), 3DES (168-bit), AES (128-bit)
|
|
IPSec |
IPSec server: |
|
IPSec client: |
|
IPSec passthrough: |
|
IPSec simultaneous tunnels: |
16 |
|
L2TP |
L2TP server: |
|
L2TP client: |
|
L2TP passthrough: |
|
|
PPTP |
PPTP server: |
|
PPTP client: |
|
PPTP passthrough: |
|
PPTP simultaneous tunnels: |
8 |
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Intrusion Detection System (IDS): |
|
Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering, packet filtering
|
Device Management
|
Default IP address: |
192.168.1.254 |
Default admin username: |
admin |
Default admin password: |
admin |
Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard
|
Firmware upgradeable: |
|
Configuration backup/restore: |
|
Email alerts: |
|
Event log: |
|
Diagnostic functions: |
|
Misc hardware info
|
SNMP support: |
SNMP v.3
|
IPv6 support: |
|
NTP client: |
|
Links
|
Product page: |
http://www.billion.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|