reducing ping

jorg2007 · Post by **jorg2007** » Sun Dec 31, 2006 3:46 am

I have a steady ping of about 200 thats from australia to other countrys when playing games online is there any way to reduce to around 160 ,im using broadband thanks.

jorg2007 · Post by **jorg2007** » Sun Dec 31, 2006 6:07 am

« SpeedGuide.net TCP Analyzer Results »
Tested on: 12.31.2006 06:03
IP address: 203.59.xx.xxx

TCP options string: 020405ac0103030201010402
MSS: 1452
MTU: 1492
TCP Window: 257004 (multiple of MSS)
RWIN Scaling: 2
Unscaled RWIN : 64251
Reccomended RWINs: 63888, 127776, 255552, 511104
BDP limit (200ms): 10280kbps (1285KBytes/s)
BDP limit (500ms): 4112kbps (514KBytes/s)
MTU Discovery: ON
TTL: 53
Timestamps: OFF
SACKs: ON
IP ToS: 00100000 (32)
Precedence: 001 (priority)
Delay: 0 (normal delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: CS1 001000 (8) - class 1 (RFC 2474). Similar forwarding behavior to the ToS Precedence field.

Sava700 · Post by **Sava700** » Sun Dec 31, 2006 12:04 pm

just look around for different servers in these other countries.. You might be able to increase your speed package too.

What kinda of broadband are you on?

jorg2007 · Post by **jorg2007** » Sun Dec 31, 2006 11:50 pm

im on broadband 2+

jorg2007 · Post by **jorg2007** » Sun Dec 31, 2006 11:56 pm

here i done a analyzer is ther any room for improvement « SpeedGuide.net TCP Analyzer Results »
Tested on: 12.31.2006 23:55
IP address: 203.59.xx.xxx

TCP options string: 020405ac0103030201010402
MSS: 1452
MTU: 1492
TCP Window: 257004 (multiple of MSS)
RWIN Scaling: 2
Unscaled RWIN : 64251
Reccomended RWINs: 63888, 127776, 255552, 511104
BDP limit (200ms): 10280kbps (1285KBytes/s)
BDP limit (500ms): 4112kbps (514KBytes/s)
MTU Discovery: ON
TTL: 53
Timestamps: OFF
SACKs: ON
IP ToS: 00100000 (32)
Precedence: 001 (priority)
Delay: 0 (normal delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: CS1 001000 (8) - class 1 (RFC 2474). Similar forwarding behavior to the ToS Precedence field.

trogers · Post by **trogers** » Mon Jan 01, 2007 12:03 am

jorg2007 wrote:im on broadband 2+

If your service is ADSL2+, that may mean your speed will be 10 mbps or more, depending on your distance to your ISP central switch station.

Try these settings with TCP Optimizer to optimize your connection:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1492
TTL - 64
TCP Receive Window - 511104
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 136
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

jorg2007 · Post by **jorg2007** » Mon Jan 01, 2007 8:43 am

done another test after what you told me to do with the optimizer but i couldnt find the network adapter selection - your NIC bit where you said or what does it mean and has it made any difference i also noticed a connection speed slider bar do i have to adjust that to its currently set at 2000kbps thanks « SpeedGuide.net TCP Analyzer Results »
Tested on: 01.01.2007 08:38
IP address: 203.59.xx.xxx

TCP options string: 020405ac0103030301010402
MSS: 1452
MTU: 1492
TCP Window: 511104 (multiple of MSS)
RWIN Scaling: 3
Unscaled RWIN : 63888
Reccomended RWINs: 63888, 127776, 255552, 511104
BDP limit (200ms): 20444kbps (2556KBytes/s)
BDP limit (500ms): 8178kbps (1022KBytes/s)
MTU Discovery: ON
TTL: 53
Timestamps: OFF
SACKs: ON
IP ToS: 00100000 (32)
Precedence: 001 (priority)
Delay: 0 (normal delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: CS1 001000 (8) - class 1 (RFC 2474). Similar forwarding behavior to the ToS Precedence field.

trogers · Post by **trogers** » Mon Jan 01, 2007 8:55 am

Settings looks right. MTU is at 1492 and RWIN is at 511104. This tweak will not lower your ping but will improve your speed to overseas servers.

jorg2007 · Post by **jorg2007** » Mon Jan 01, 2007 9:15 am

cool thanks ,and what about the slider bar do i leave that where its .Also i ran a free progam called ccleaner helpd with the ping a little about 10ms

trogers · Post by **trogers** » Mon Jan 01, 2007 9:24 am

The slider bar is for use with 'Optimal setting'. You do not need to use it. Just use 'Custom setting' and follow the values I have given.

jorg2007 · Post by **jorg2007** » Tue Jan 02, 2007 2:58 am

thanks

jorg2007 · Post by **jorg2007** » Sat Jan 06, 2007 6:43 am

Just had a look in my network settings status in the cotrol panel under network connections it says 100.0mbps also someone was saying you can also reduce the ping by reducing the packet size or net speed do you know how this is done .i just need to drop it another 40ms.

trogers · Post by **trogers** » Sat Jan 06, 2007 10:10 am

jorg2007 wrote:Just had a look in my network settings status in the cotrol panel under network connections it says 100.0mbps also someone was saying you can also reduce the ping by reducing the packet size or net speed do you know how this is done .i just need to drop it another 40ms.

The 100 mbps setting of your network adapter card is to fit the ADSL2+ line which has a speed greater than 10 mbps.

Try these settings with TCP Optimizer for a slightly small packet size:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1454
TTL - 64
TCP Receive Window - 520352
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 136
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

jorg2007 · Post by **jorg2007** » Sat Jan 06, 2007 11:54 am

« SpeedGuide.net TCP Analyzer Results »
Tested on: 01.06.2007 11:47
IP address: 203.59.xx.xxx

TCP options string: 020405860103030301010402
MSS: 1414
MTU: 1454
TCP Window: 520352 (multiple of MSS)
RWIN Scaling: 3
Unscaled RWIN : 65044
Reccomended RWINs: 65044, 130088, 260176, 520352
BDP limit (200ms): 20814kbps (2602KBytes/s)
BDP limit (500ms): 8326kbps (1041KBytes/s)
MTU Discovery: ON
TTL: 52
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

trogers · Post by **trogers** » Sat Jan 06, 2007 12:04 pm

Does this setting help with your pings?

jorg2007 · Post by **jorg2007** » Sat Jan 06, 2007 12:11 pm

just tried a server ive been playing on alot on and it hasnt made any differece ping wise, can you suggest any other settings or tests

trogers · Post by **trogers** » Sat Jan 06, 2007 12:21 pm

Sorry, no more ideas.

jorg2007 · Post by **jorg2007** » Sat Jan 06, 2007 12:44 pm

gameplay seems a lot better and faster anyway thanks

jorg2007 · Post by **jorg2007** » Sun Jan 07, 2007 6:14 am

i also found out this info for my adsl +2 plan if it helps for the settings
3,000/1,000k im on the $49.95 plan http://www.iinet.net.au/products/broadband/plans.html

trogers · Post by **trogers** » Sun Jan 07, 2007 6:22 am

Try these settings with TCP Optimizer for 3 mbps bandwidth:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1454
TTL - 64
TCP Receive Window - 130088
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 136
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

jorg2007 · Post by **jorg2007** » Sun Jan 07, 2007 7:14 am

« SpeedGuide.net TCP Analyzer Results »
Tested on: 01.07.2007 07:13
IP address: 203.59.xx.xxx

TCP options string: 020405860103030101010402
MSS: 1414
MTU: 1454
TCP Window: 130088 (multiple of MSS)
RWIN Scaling: 1
Unscaled RWIN : 65044
Reccomended RWINs: 65044, 130088, 260176, 520352
BDP limit (200ms): 5204kbps (650KBytes/s)
BDP limit (500ms): 2081kbps (260KBytes/s)
MTU Discovery: ON
TTL: 53
Timestamps: OFF
SACKs: ON
IP ToS: 00100000 (32)
Precedence: 001 (priority)
Delay: 0 (normal delay)
Throughput: 0 (normal throughput)
Reliability: 0 (normal reliability)
Cost: 0 (normal cost)
Check bit: 0 (correct)
DiffServ: CS1 001000 (8) - class 1 (RFC 2474). Similar forwarding behavior to the ToS Precedence field.

SG Broadband Community

reducing ping

reducing ping

here i done another analyzer test