Shortcuts
|
 |
Mercusys MB230-4G
|
| details: | 4G+ Cat6 AC1200 Wireless Dual Band Gigabit Router |
| hardware type: | Mobile Router (3G, 4G, 5G) |
| date added: | 2024-04-27 |
| updated: | 2024-05-29 |
Fully compatible with FDD-LTE and TDD-LTE to work with most service providers worldwide. Insert a nano SIM card and turn on the router to share your 4G LTE network with multiple Wi-Fi devices.
MB230-4G supports the 4G+ Cat 6, which uses Carrier Aggregation technology, to achieve fast LTE speeds up to 300 Mbps download and 50 Mbps upload. It can also share a dual band Wi-Fi network for gaming, streaming, and more.
The router supports up to 64 simultaneous connections for tablets, laptops, mobile phones, and other devices.
Internal high gain antennas strengthen the WiFi signal, extend the range of connection establishment, and boost the sensitivity of the router.
With a fully functional WAN/LAN port, MB230-4G can work as a router which is compatible with cable, fiber, and DSL modems, or provide internet for wired devices.
The router features flow switch - turn on or off your 4G network access by yourself to avoid unknowingly consumption.
Roaming switch - if your 4G nano SIM card supports roaming, you can easily turn it on or off to access.
Setting limit - set the maximum amount of flow used to avoid overspending. And you can set receiving SMS alerts when approaching the limit.
Set up and manage your Wi-Fi through the MERCUSYS app from your smartphone (Android, iOS).
Supported bands:
EU:
FDD-LTE: B1/B3/B5/B7/B8/B20/B28 (2100/1800/850/2600/900/800/700 MHz)
TDD-LTE: B38/B40 (2600/2300 MHz)
HSPA+/UMTS: B1/B5/B8 (2100/850/900 MHz)
| MB230-4G Features |
| General
|
| Availability: |
currently available
|
| Street price: |
$94
|
| LAN / WAN Connectivity
|
| WAN throughput: |
300 Mbps
|
| WAN throughput upstream: |
50 Mbps
|
| WAN ports: |
1
one of the LAN ports can act as a WAN port as well |
| WAN port(s) type: |
SIM card slot
|
| LAN ports: |
2 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Wireless
|
| Maximum Wireless Speed: |
1200 Mbps (Wi-Fi 5)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
802.11ac (Wi-Fi 5)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
WPA3
|
| WiFi modes: |
Access point
|
| internal antenna(s): |
2 |
| Transmit Power: |
+20 dBm |
| Receiver Sensitivity: |
-95 dBm |
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| 3G UMTS HSPA: |
HSPA+/UMTS: B1/B5/B8 (2100/850/900 MHz) |
| 4G LTE: |
FDD-LTE: B1/B3/B5/B7/B8/B20/B28 (2100/1800/850/2600/900/800/700 MHz); TDD-LTE: B38/B40 (2600/2300 MHz) |
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
IP Address filtering, MAC Address filtering
|
| Device Management
|
| Alternate Admin URL: |
http://mwlogin.net |
| Administration: |
Remote configuration (WAN)
|
| Firmware upgradeable: |
|
| Event log: |
|
| Diagnostic functions: |
|
| Misc hardware info
|
| Max clients: |
64
|
| IPv6 support: |
|
| Links
|
| Product page: |
https://www.mercusys.com/en/product/deta... |
| Datasheet: |
https://static.mercusys.com/manual/MB230... |
| Manual: |
https://static.mercusys.com/manual/19100... |
| Quick Install Guide: |
https://static.mercusys.com/manual/71075... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
