| LP-7696U Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
|
| USB port(s): |
1
for client devices |
| USB port type: |
USB 2.0
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
Wireless client
Wireless bridge (PtP)
WISP mode
|
| external antenna(s): |
2 |
| ext antenna(s) removable ?: |
|
| Antenna connector: |
RP-SMA (Reverse SMA)
|
| Antenna gain: |
7 dBi |
| Transmit Power: |
+25 dBm |
| Receiver Sensitivity: |
-91 dBm |
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering
|
| Device Management
|
| Default IP address: |
192.168.1.254 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
|
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info
|
| NTP client: |
|
| Links
|
| Product page: |
http://www.loopcomm.com/front/bin/ptdeta... |
| Datasheet: |
http://www.loopcomm.com/ezcatfiles/loopc... |
| Manual: |
http://www.loopcomm.com/ezcatfiles/loopc... |
