| JBR4300WN Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Multi-DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Routing Protocols: |
IGMP Multicast (RFC 1112)
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
|
| WiFi modes: |
Access point
Wireless client
Repeater mode
|
| external antenna(s): |
2 |
| Antenna gain: |
3 dBi |
| Transmit Power: |
+14 dBm |
| Receiver Sensitivity: |
-68 dBm |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
guest |
| Default admin password: |
guest |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
|
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info
|
| RAM: |
16 Mb |
| Flash Memory: |
4 Mb |
| NTP client: |
|
| Links
|
| Product page: |
http://www.justec.com.tw/productpage/wir... |
| Datasheet: |
http://www.justec.com.tw/PDF/wireless/jb... |
