| 8860-C1 Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN throughput: |
24 Mbps
|
| WAN throughput upstream: |
3 Mbps
|
| WAN ports: |
1
|
| WAN port(s) type: |
DSL/ISDN/POTS connector (RJ-11)
|
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
|
| DSL
|
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
|
| PPPoE client: |
|
| PPPoA client: |
|
| VPN
|
| VPN Authentication: |
IKE (IPSec) Key Management
|
| VPN Encryption: |
DES (56-bit), 3DES (168-bit), AES (128-bit)
|
| |
IPSec |
| IPSec passthrough: |
|
| IPSec simultaneous tunnels: |
16 |
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| PPTP simultaneous tunnels: |
8 |
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
Domain/URL blocking, packet filtering
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
|
| Misc hardware info
|
| SNMP support: |
SNMP v.3
|
| NTP client: |
|
| Notes: |
This router features an integrated console port. |
