The Broadband Guide
SG
search advanced

Encore ENDSL-A2+WIGX2

details: ADSL2+ Modem with Wireless Router
hardware type: DSL Wireless Router
date added: 2009-11-10
updated: 2020-04-07
The ENDSL-A2+WIGX2 is an ADSL1/2/2+ wireless router with one RJ-11 WAN port and four 10/100Mbps LAN ports. It provides WAN throughput of up to 24Mbps.

The integrated access point complies with the IEEE 802.11b/g standards and uses WMM (QoS) to prioritize the traffic over the network. It supports WEP and WPA/WPA2 wireless encryption.

This router supports VPN pass-through for IPSec, L2TP and PPTP. It features a built-in SPI firewall to protect the network against Denial of Service (DoS) attacks.
 
 
 
 ENDSL-A2+WIGX2 Features
 General
 Availability: discontinued
 Street price: $49
 LAN / WAN Connectivity
 WAN throughput: 24 Mbps
 WAN throughput upstream: 1 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 DNS proxy: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 Transparent Bridging (IEEE 802.1d): yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
 WiFi modes: Access point
 external antenna(s): 1
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Transmit Power: +15 dBm
 Receiver Sensitivity: -60 dBm
 Multiple SSID: yes
 WMM (QoS): yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: IP Address filtering
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: trendchip
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Telnet / CLI
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
 Misc hardware info
 SNMP support: SNMP v.1, SNMP v.2
 NTP client: yes
 Links
 Product page: https://www.encorenetworks.com/

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About