Shortcuts
|
 |
Edimax EW-7303HPn V2
|
| details: | N150 Outdoor Wireless Access Point/Range Extender with Built-in 12dBi Antenna |
| hardware type: | Wireless Access Point |
| date added: | 2013-06-18 |
| updated: | 2013-09-29 |
The Edimax EW-7303HPn V2 is a high power outdoor range extender/access point that complies with wireless 802.11b/g/n standards. When it is connected to wireless 802.11n compatible devices, the EW-7303HPn V2 can achieve transmission rates of up to 150Mbps. Its high power design boosts its wireless output power to 600mW, enabling it to cover a distance of over 5 kilometers.
The high power performance of the EW-7303HPn V2 is complimented by a built-in 12dBi directional panel antenna. This high-gain antenna not only increases the transmission distance, but also stabilizes the wireless signal. Additionally, the EW-7303HPn V2 is designed with an SMA connector that enables the user to connect external antennas to this access point.
The Edimax EW-7303HPn V2 can be configured to operate in four modes: AP mode, WDS mode, WDS with AP mode, and repeater mode.
| EW-7303HPn V2 Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP client: |
|
| Wireless
|
| Maximum Wireless Speed: |
150 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
|
| WiFi modes: |
Access point
Wireless bridge (PtP)
Repeater mode
WISP mode
|
| internal antenna(s): |
12 |
| external antenna(s): |
1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: |
RP-SMA (Reverse SMA)
|
| Transmit Power: |
+26 dBm |
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Device Management
|
| Default IP address: |
192.168.2.1 |
| Default admin username: |
admin |
| Default admin password: |
1234 |
| Administration: |
Web-based (LAN)
|
| Firmware upgradeable: |
|
| Event log: |
|
| Misc hardware info
|
| RAM: |
32 Mb |
| Flash Memory: |
4 Mb |
| Power over Ethernet (PoE): |
|
| Links
|
| Product page: |
http://www.edimax.com/en/produce_detail.... |
| Datasheet: |
http://www.edimax.com/images/Image/datas... |
| Manual: |
http://www.edimax.com/images/Image/manua... |
| Quick Install Guide: |
http://www.edimax.com/images/Image/QIG/W... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
