![](/images/bg.gif)
Shortcuts
|
![Edimax](/images/hardware/_logos/edimax.gif) |
Edimax BR-6428nS V4
|
details: | N300 Wi-Fi Router, Access Point, Range Extender, Wi-Fi Bridge & WISP |
hardware type: | Wireless Router |
date added: | 2016-06-07 |
updated: | 2020-02-16 |
The BR-6428nS V4 is a 300Mbps high-speed 5-in1 multi-function Wi-Fi solution which supports IEEE 802.11b/g/n standards and provides improved coverage with high-gain antennas.
Operating as a router, access point, range extender, Wi-Fi Bridge or WISP, the BR-6428nS V4's flexibility meets the demands of most networking applications.
Multi-SSID enables users to configure up to five separate SSIDs in order to group and manage users according to their requirements (Access point mode only).
The smart iQ Setup wizard makes setup and installation as easy as a few clicks.
BR-6428nS V4 Features |
General
|
Availability: |
discontinued
|
LAN / WAN Connectivity
|
WAN ports: |
1 |
WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
WAN port auto cross-over: |
|
LAN ports: |
4 |
LAN ports type: |
10/100 Base-TX (RJ-45)
|
LAN ports auto cross-over: |
|
Router
|
NAT routing: |
|
Multihomed: |
|
DMZ: |
|
Port forwarding: |
|
Port triggering: |
|
DHCP server: |
|
DHCP client: |
|
Dynamic DNS client: |
|
QoS: |
|
UPnP: |
|
Routing Protocols: |
VLAN tagging (802.1q) IGMP Multicast (RFC 1112)
|
Wireless
|
Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4)
|
Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable
|
WiFi modes: |
Access point Wireless bridge (PtP) Repeater mode WISP mode
|
external antenna(s): |
2 |
Antenna gain: |
5 dBi |
Transmit Power: |
+18 dBm |
Receiver Sensitivity: |
-68 dBm |
Multiple SSID: |
|
WMM (QoS): |
|
WPS (Wi-Fi Protected Setup): |
|
VPN
|
|
IPSec |
IPSec passthrough: |
|
|
PPTP |
PPTP passthrough: |
|
Firewall
|
SPI firewall: |
|
DoS / DDoS protection: |
|
Device Management
|
Default IP address: |
192.168.2.1 |
Default admin username: |
admin |
Default admin password: |
1234 |
Administration: |
Web-based (LAN) Remote configuration (WAN)
|
Firmware upgradeable: |
|
Event log: |
|
Misc hardware info
|
RAM: |
32 Mb |
Flash Memory: |
4 Mb |
Links
|
Product page: |
http://www.edimax.com/edimax/merchandise... |
Datasheet: |
http://www.edimax.com/edimax/mw/cufiles/... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|