| WR11000 Features |
| General
|
| Availability: |
announced
|
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
Gigabit Ethernet (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
3 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| QoS: |
|
| UPnP: |
|
| Routing Protocols: |
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
|
| Wireless
|
| Maximum Wireless Speed: |
11 Gbps (Wi-Fi 6)
|
| WiFi standards supported: |
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
802.11ac (Wi-Fi 5)
802.11ax (Wi-Fi 6)
802.11ax (Wi-Fi 6E - 6GHz)
802.11be (Wi-Fi 7)
|
| Wifi security/authentication: |
WPA (TKIP)
WPA2 (AES)
WPA3
|
| WiFi modes: |
Access point
Wireless client
Repeater mode
WISP mode
|
| external antenna(s): |
6 |
| ext antenna(s) removable ?: |
 |
| Antenna gain: |
5 dBi |
| WPS (Wi-Fi Protected Setup): |
|
| MU-MIMO: |
|
| Beamforming: |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| VPN
|
| |
IPSec |
| IPSec server: |
|
| IPSec client: |
|
| IPSec passthrough: |
|
| |
L2TP |
| L2TP server: |
|
| L2TP client: |
|
| L2TP passthrough: |
|
| |
PPTP |
| PPTP server: |
|
| PPTP client: |
|
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: |
IP Address filtering, MAC Address filtering
|
| Device Management
|
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Mobile App
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
ping, traceroute |
| Misc hardware info
|
| Chipset: |
Qualcomm IPQ5322 |
| RAM: |
1024 Mb |
| Flash Memory: |
128 Mb |
| IPv6 support: |
|
| Links
|
| Product page: |
https://www.cudy.com/products/wr11000-1-... |
| Datasheet: |
https://www.cudy.com/cdn/shop/files/WR11... |
Shortcuts
