Shortcuts
|
 |
Cisco Valet Plus M20
|
| details: | Wireless-N HotSpot |
| hardware type: | Wireless Router |
| date added: | 2010-04-01 |
| updated: | 2013-05-01 |
The Valet Plus M20 is a wireless broadband router with a single 10/100/1000Mbps WAN port and four 10/100/1000Mbps LAN ports.
The integrated access point complies with IEEE 802.11n, providing wireless transmission rates of up to 300Mbps. It supports WEP and WPA/WPA2 wireless encryption. The Valet Plus M20 uses WMM (QoS) to prioritize the traffic over the network. A WPS button allows for easy wireless security configuration.
This router provides VPN pass-through for IPSec, L2TP and PPTP. It has a built-in SPI firewall that provides a reliable protection against hackers and malicious attacks.
The Valet Plus M20 can be easily configured via Web-based configuration utility or by using the Cisco Connect software. It has three simple steps to get you set up a secure wireless network. In addition to a simple wireless network setup wizard, the Cisco Connect software includes parental controls (access time, websites) and allows for simple management of a separate, secure network for guests.
| Valet Plus M20 Features |
| General
|
| Availability: |
currently available
|
| Release Date: |
2010-03-31 |
| List price: |
$149 |
| Street price: |
$129
|
| Warranty: |
1 year(s) |
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
Gigabit Ethernet (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
4 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| MAC Address clone: |
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
|
| internal antenna(s): |
3 |
| Antenna gain: |
2 dBi |
| Transmit Power: |
+17 dBm |
| Receiver Sensitivity: |
-71 dBm |
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| Security log: |
|
| Filtering: |
Domain/URL blocking, IP Address filtering, keyword/content filtering, date/time scheduling, Proxy, Java, ActiveX, Cookie
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Windows application
MAC application
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
ping, traceroute |
| Links
|
| Product page: |
http://homestore.cisco.com/en-us/Routers... |
| Datasheet: |
http://homedownloads.cisco.com/downloads... |
| Manual: |
http://homedownloads.cisco.com/downloads... |
| Quick Install Guide: |
http://homedownloads.cisco.com/downloads... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
