Shortcuts
|
 |
Belkin F5D9230-4
|
| details: | Wireless G Plus MIMO Router |
| hardware type: | Wireless Router |
| date added: | 2006-02-15 |
| updated: | 2014-11-18 |
The F5D9230-4 is a wireless router with a single 10/100Base-T WAN port and four 10/100Base-T LAN ports. This router is based on Airgo Networks' True MIMO (Multiple Input Multiple Output) antenna and chipset design. Using MIMO technology, it provides wider network coverage and higher transmission speeds.
The integrated access point complies with the IEEE 802.11b/g standards. Using "G Plus" technology, it provides wireless transmission speeds of up to 108Mbps. It can operate in wireless bridge mode, as well. This AP supports WEP and WPA/WPA2 wireless encryption.
The router supports VPN pass-through for PPTP and features a built-in firewall to protect the network against hackers and Denial of Service (DoS) attacks.
| F5D9230-4 Features |
| General
|
| Availability: |
discontinued
|
| List price: |
$74 |
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Serial port: |
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| MAC Address clone: |
|
| DSL
|
| PPPoE client: |
|
| Wireless
|
| Maximum Wireless Speed: |
108 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11g MIMO
802.11g+ (108 Mbps+)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
RADIUS authentication
|
| WiFi modes: |
Access point
Wireless bridge (PtP)
|
| external antenna(s): |
2 |
| Default SSID: |
Belkin_G_Plus_MIMO |
| VPN
|
| |
PPTP |
| PPTP server: |
|
| PPTP passthrough: |
|
| Firewall
|
| DoS / DDoS protection: |
|
| Security log: |
|
| Filtering: |
IP Address filtering, MAC Address filtering, date/time scheduling
|
| Device Management
|
| Default IP address: |
192.168.2.1 |
| Default admin password: |
(blank) |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
|
| Firmware upgradeable: |
|
| Misc hardware info
|
| NTP client: |
|
| Notes: |
The router's default IP address is 192.168.2.1, and the 802.11g Access Point is 192.168.2.254 |
| Links
|
| Product page: |
http://www.belkin.com/IWCatProductPage.p... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
