Shortcuts
|
 |
4ipnet EAP750
|
| details: | Concurrent Dual-band Enterprise Access Point |
| hardware type: | Wireless Access Point |
| date added: | 2012-11-20 |
| updated: | 2020-03-29 |
The 4ipnet EAP750 concurrent dual-band Wall Jack Access Point is an on-the-wall as well as a ceiling-mounted Wi-Fi IEEE 802.11a/b/g/n access point.
The IEEE 802.3af Power over Ethernet (PoE) compliant design eliminates the need for power sockets, allows installation of this device in areas where power outlets are not readily available to improve deployment flexibility.
EAP750 supports Tunnel-based AP Management, and comes with all standards demanded by enterprise applications, including business-grade security (802.1X, WPA and WPA2), and multiple ESSIDs with VLAN tags to separate the traffics of different departments.
EAP750 offers a "Channel Analysis" feature, where an IT operator can effortlessly carry out a real-time wireless environment analysis before deploying an EAP750. With just some clicks of the buttons, device activity, possible wireless interference, as well as channel density are clearly displayed.
Supporting up to 300Mbps wireless speed with its 802.11n 2x2 MIMO solution, and all gigabit Ethernet interface, EAP750 is suitable for bandwidth-hungry applications such as video surveillance, multi-media streaming over wireless. The QoS - WMM ensures the quality of voice/video when multiple applications are transmitting media and data over the air simultaneously.
| EAP750 Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
2 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP client: |
|
| ToS / DiffServ: |
|
| Routing Protocols: |
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
Wireless bridge (PtP)
Repeater mode
|
| external antenna(s): |
4 |
| Transmit Power: |
+24 dBm |
| Receiver Sensitivity: |
-95 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info
|
| SNMP support: |
SNMP v.1, SNMP v.2
|
| IPv6 support: |
|
| Power over Ethernet (PoE): |
|
| Links
|
| Datasheet: |
http://www.speedguide.net/images/hardwar... |
| Quick Install Guide: |
http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
