Yeah, Upgraded my System!
Got a Athlon(?)AMD XP 1700+
I have a Asus A7V266-E Board, One of the First Settings on the Motherboard I need to settle is the "Cpu Type Frequency Setting"
Jumpers choices are either:
Athlon/Duron (default) or
Palomino (which i have it set at)
I can give more details, but thats about it~
Is the True name of my Cpu an AMD Palomino or an AMD Athlon?
Side note: next question i'll ask is about the I/O Voltage Settings
(manual says ~ these jumpers allow you to select the voltage supplied to the Dram, chipset, AGP, and PCI...)
Choices are 2.5v / 2.65v / 2.75v / 2.8v
Confused on that one because, the manual showed 2.65v as default...
but it was set at 2.8v ~
Had issues with bad ram(whole other story-got at computer fair), and reset up to the manual default of 2.65v - then a found a 'loose' page they added as an Appendix and on that page it shows 2.8v as the defualt! uggghhh!!! - i'm running at 2.65v but i want the proper voltage...
System Spec Basics:
Asus A7V266-E / AMD Xp 1700+ / 256DDR / GeForce3 Ti 2000 / SbLive! Digital / Xp Professional
THANKS ALOT for any advice~
AMD Xp 1700+ is it a Palomino or Athlon?
- YeOldeStonecat
- SG VIP
- Posts: 51171
- Joined: Mon Jan 15, 2001 12:00 pm
- Location: Somewhere along the shoreline in New England
XP is one of the newer generations of Athlon, it was nicknamed the Palomino....but pretty much just called AMD Athlon XP. Similar to the MP variant, the Athlon MP.
Take a look at http://www.amd.com
Like Intels also....many variants of a line, such as P4, and P4a "Northwood", etc. The Intel PIII had "Coppermines", and "Tualatin", etc.
Take a look at http://www.amd.com
Like Intels also....many variants of a line, such as P4, and P4a "Northwood", etc. The Intel PIII had "Coppermines", and "Tualatin", etc.
MORNING WOOD Lumber Company
Guinness for Strength!!!
Guinness for Strength!!!