Tweak my new cable please

cesium · Post by **cesium** » Sat Aug 14, 2004 2:45 pm

I just reformatted, so I lost all my old settings

All I have done so far is change the MTU and MSS.

But my speed tests fluctuate much too much

My line: WideOpenWest 2mb/300kb
I used to get about 2.2mb/285kb

Now, I'm getting only 1.3mb/205kb, and on my other computer, I get my old speed, of 2.2mb/285kb

Here are my test restults

:

TCP options string = 020405b40103030201010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 256960
RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
Unscaled Receive Window = 64240

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 53 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000

Thanks

mnosteele52 · Post by **mnosteele52** » Sat Aug 14, 2004 3:58 pm

Use the following settings in CableNut:

DefaultReceiveWindow = 256000
DefaultSendWindow = 38400
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 819200
MaxFastTransmit = 64000
MediumBufferSize = 150400
PriorityBoost = 0
SmallBufferSize = 12800
TransmitWorker = 32
FastSendDatagramThreshold = 1024
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 64240
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 2
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 64240
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 240

VERY IMPORTANT TO DO THE FOLLOWING

1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer and set your duplex mode to "auto". If you are using a router make sure you have the latest firmware. DO NOT CONNECT YOUR MODEM VIA USB!!

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download, update and scan with SpyBot S&D EXACTLY as I explain HERE & Ad-Aware EXACTLY as I explain HERE to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

7. Make sure you do the faster web page tweak in my Help & Tips link.

8. If you have Zone Alarm as a firewall uninstall it and search your pc for the left over files.

9. Install Sygate Firewall they have a FREE and Pro version.

10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, I recommend using AVG 6.0 it is an excellent FREE AV app. Make sure you set it up EXACTLY as I explain HERE.

11. Make sure you have ALL of the latest Windows Updates.