my speed went terribly down from like 2.5 to about 750k
TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
bandwidth * delay product:
Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 49 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 01011100
Precedence (priority) = 100 (flash override)
Delay = 1 (low delay)
Throughput = 1 (high throughput)
Reliability = 0 (normal reliability)
Cost = 1 (low cost)
Hit me with the numbers!
Hit me with the numbers!
XBox Live Tag: TANK45
Windows Mass Errors
Windows Mass Errors
- mnosteele52
- Posts: 11913
- Joined: Tue Jul 24, 2001 12:00 pm
- Location: Chesapeake, VA
tank45 use the following settings in CableNut, by the way your caps are 2000/384.
BcastNameQueryCount - 1
BcastQueryTimeout - 100
BSDUrgent - 1
CacheTimeout - 600000
DefaultRecvWindow - 64240
DefaultTTL - 64
EnableDNS - 0
GlobalMaxTcpWindoSize - 64240
KeepAliveInterval - 500
KeepAliveTime - 14400000
Lanabase - 0
LocalCopyMade - 1
MaxConnections - 100
MaxConnectRetries - 5
MaxDataRetries - 64
NameTableSize - 255
NameSrvQueryTimeout - 100
PMTUBlackHoleDetect - 0
PMTUDiscovery - 1
RoutingBufSize - 146432
RoutingPackets - 100
SackOpts - 1
SessionKeepAlive - 7200
SessionTableSize - 255
Size/Small/Medium/Large - 3
Tcp1323Opts - 0
TcpTimedWaitDelay - 30
MaxDupAcks - 3
DefaultTOS - 90
IGMPLevel - 2
MaxConnectionsPer1_0Server - 20
MaxConnectionsPerServer - 10
VERY IMPORTANT TO DO THE FOLLOWING
1. Under your Configuration tab for your Network settings make sure you have only the needed protocols.
2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. Make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.
4. Clear your temporary internet files.
5. Power cycle your modem, unplug it for atleast 15 seconds.
6. Download and update then do a scan with SpyBot 1.2 & Ad Aware 6.0 to remove any spyware then install and update SpywareBlaster 1.2 to stay spyware FREE. It is an ABSOLUTE MUST that you use BOTH Ad Aware 6.0 & SpyBot 1.2, don't think you are safe with just one of these apps since one will find what the other misses.
7. Make sure you do the faster web page tweak in my Help & Tips link.

BcastNameQueryCount - 1
BcastQueryTimeout - 100
BSDUrgent - 1
CacheTimeout - 600000
DefaultRecvWindow - 64240
DefaultTTL - 64
EnableDNS - 0
GlobalMaxTcpWindoSize - 64240
KeepAliveInterval - 500
KeepAliveTime - 14400000
Lanabase - 0
LocalCopyMade - 1
MaxConnections - 100
MaxConnectRetries - 5
MaxDataRetries - 64
NameTableSize - 255
NameSrvQueryTimeout - 100
PMTUBlackHoleDetect - 0
PMTUDiscovery - 1
RoutingBufSize - 146432
RoutingPackets - 100
SackOpts - 1
SessionKeepAlive - 7200
SessionTableSize - 255
Size/Small/Medium/Large - 3
Tcp1323Opts - 0
TcpTimedWaitDelay - 30
MaxDupAcks - 3
DefaultTOS - 90
IGMPLevel - 2
MaxConnectionsPer1_0Server - 20
MaxConnectionsPerServer - 10
VERY IMPORTANT TO DO THE FOLLOWING
1. Under your Configuration tab for your Network settings make sure you have only the needed protocols.
2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. Make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.
4. Clear your temporary internet files.
5. Power cycle your modem, unplug it for atleast 15 seconds.
6. Download and update then do a scan with SpyBot 1.2 & Ad Aware 6.0 to remove any spyware then install and update SpywareBlaster 1.2 to stay spyware FREE. It is an ABSOLUTE MUST that you use BOTH Ad Aware 6.0 & SpyBot 1.2, don't think you are safe with just one of these apps since one will find what the other misses.
7. Make sure you do the faster web page tweak in my Help & Tips link.