WoW I just installed my 120MM 90cfm fan and its soooooo.........

jdblitz · Post by **jdblitz** » Fri Jan 12, 2001 5:32 pm

Sweet! I just ran UT for an hour and my cpu temp didnt freakin move!!! wow, guess its true, you need at least 10cfm more going out than going in to properly cool your pc.

Currently I have:

2 fans(25cfm each) blowin in on side
1 fan on gorb(22cfm)blowin down onto hs
1 fan bottom of case front(25 cfm) blowin in

1 fan (~20 cfm) blowin out back of case via psu
1 fan (90cfm) blowin out top front of case(temporarily mounted till I mod top of case) will post pic in a few.

total in=99
total out=110

end result=cpu heat doesnt budge. end of story. heheheheh.

------------------
There is always a way, you just might not like what you have to do to achieve it.

MY HOUSE!! 1 1/2 more months!!! and I can move in!!
<A HREF="http://www.geocities.com/jdtdhouse/Home_Central.html" TARGET=_blank>

</A>
Specs and Pics of my PC here!

jdblitz · Post by **jdblitz** » Fri Jan 12, 2001 5:43 pm

here are the pics of the sidefans and the front sunon badboy in his temporary position. gonna get 2 more sunon 120mm for intake on the front maybe and mount one blowing in and the other joining the first blowing out, what dou you think about a case mod made like a hood scoop on a camaro or maybe like a sweet chrome carbuerator cover? heheheheh, ideas ideas. anyone got any good case mod links??? anyway, heres the pics JIC you wanna see em.

the side fans

and the sunon

[This message has been edited by jdblitz (edited 01-12-2001).]

Zmoney · Post by **Zmoney** » Fri Jan 12, 2001 8:33 pm

manyour lucky.. i have my cpu temp never drops below 105. usualy around 110 -115

Zmoney · Post by **Zmoney** » Fri Jan 12, 2001 8:35 pm

manyour lucky.. i have my cpu temp never drops below 105. usualy around 110 -115

i have a T-bird thats why

YARDofSTUF · Post by **YARDofSTUF** » Sat Jan 13, 2001 12:59 am

sounds cool jdblitz, good time to post i'll be ordering my abit board and case on tuesday, need to order my fans then i can build!!!!!!!!

------------------

jdblitz · Post by **jdblitz** » Sat Jan 13, 2001 7:50 am

definately put more cfm out of case than into. the old put a fan over the processor doesnt produce any yield unless you have a higher cfm fan right on the hs than you have blowing onto the hs/fan combo, a good high output fan over your video cards will probably yield a 20 degree loss in temperature(mine did) I have an ati all in wonder pro and 2 voodoo 2's. it dropped my temps there by 20. also make sure the air is all moving in one general direction the best orientation(since hot air rises) is to put all your intakes in the lower half and all our blow holes in the top half of the case.

HalfLifer · Post by **HalfLifer** » Sat Jan 13, 2001 1:03 pm

Where did you get that program?

jdblitz · Post by **jdblitz** » Sat Jan 13, 2001 1:29 pm

It is sisioft sandra and you can download the trial version(which is what I have) for free from HERE for free. This is the mainboard information icon about halfway down. there are lots of great benchmarks and info icons you can use in the demo version, i recommend it highly. I am currently running a p3 700e @ 903 via 1.28fsb with 1.9v and all my fans. The bottom one is the full overclock speed the top one is temps @ 868 via 1.65v

freckmoto · Post by **freckmoto** » Sun Jan 14, 2001 12:30 am

I think I a going to mod my case by putting a blow hole at the top. I have the Antec 1030B, which already has more exhaust than intake, but I want cooler

Freckmoto