RWIN not displaye drigh tin TCP Optimiser

[Doc_Teal]

I have mine set to a higher value than it is showing but no matter what i set it to it only shows it at 65535? whats up?
Is it cuz of my router?

TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65535
Note: Under Windows 9x, if you have RWIN set to any other value, and the Analyzer reports 65535 you might need to install the MS Vtcp386 fix.
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 2621.4 kbps (327.675 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1048.56 kbps (131.07 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 48 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

[Doc_Teal]

Oh and i sholdnt need the MS Vtcp386 fix im running XP

[Lobo]

Did you buy XP from the Shaft, as some of the ones downloaded off net won't go above 65535, then set it to 6424:)

[mnosteele52]

Originally posted by Lobo
Did you buy XP from the Shaft, as some of the ones downloaded off net won't go above 65535, then set it to 6424:)

Huh? Doc we had your connection all set what are you trying to do now? Tcp1323Opts needs to be set to 1 if you are using a RWIN of 65535 or higher, but with Cox there is no need to go higher.

[Lobo]

I have seen some that will not go above 65535

[Doc_Teal]

lmao Mnosteele52 come on you gotta understand the constant craving for MORE SPEED hehe