W2K and XP settings for all CPU's

Lobo · Post by **Lobo** » Thu Jun 27, 2002 1:18 pm

DefaultRecieveWindow = 51100
DefaultSendWindow = 51100
InitialLargeBufferCount = 50
InitialMediumBufferCount = 100
InitialSmallBufferCount = 150
LargeBufferSize = 40960
MaxFastTransmit = 2 or 51100
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 256
TransmitWorker = 32
FastSendDatagramThreshold=0
EnableFastRouteLookup = Blank
EnablePMTUDiscovery = 1
GlobalMaxTcpWindowSize = 51100
MaxFreeTcbs = 1024
MaxHashTableSize = 3072
MaxNormLookupMemory = 5000000
SackOpts = Blank
Tcp1323Opts = Blank
TcpMaxDupAcks = 2
TcpRecvSegmentSize = 5840
TcpSendSegmentSize = 2920
TcpUseRFC1122UrgentPointer=0
TcpWindowSize = 51100
MaxConnectionsPer1_0Server = 40
MaxConnectionsPerServer = 20
DefaultTTL = 64
DisableTOSusersetting=0
DefaultTOSValue= 0-255 (Between 0 and 255)

Test running..........
** Speed 3361(down)/364(up) kbps **
(At least 67 times faster than a 56k modem)
Finish.

Lobo · Post by **Lobo** » Thu Jun 27, 2002 6:38 pm

Try it, you may be suprised

Patapouf · Post by **Patapouf** » Thu Jun 27, 2002 8:50 pm

Thx Master Lobo

This settings are for all connections, ADSL, Cable, ... ?
And usually I put a RWIN 14520, what value must I change ?
I w8 ur reply and I'll test

Lobo · Post by **Lobo** » Thu Jun 27, 2002 8:58 pm

Use whatever RWIN you want, if it's not a multiple but it's fast, oh well

Patapouf · Post by **Patapouf** » Thu Jun 27, 2002 10:07 pm

I 've tried on my ADSL 512/128 with RWIN 23232.
Your settings works fine, an my ping is more stable in online games ; but it's strange, I have more lag also.

AznStyl · Post by **AznStyl** » Thu Jun 27, 2002 10:51 pm

Hi lobo and panto... welll i have notice what panto notice.. the lag is higher than usual.. usually i get lag at .15seconds now its at .3 sometimes .5 .. i have test several bandwidth test.. and it shows vary speed.. my cable cap are at 800/200 ... my 1st test was 802/178 2nd test at 340/712 (2nd test is really weird cause my upload cap at 200 and it showing 712) my 3rd test at 435/ 128 anyway... just to fill u in with the result of my test...

Lobo · Post by **Lobo** » Fri Jun 28, 2002 9:48 am

Try:

MaxConnectionsPer1_0Server = 99
MaxConnectionsPerServer = 99
DefaultTTL = 32

Lobo · Post by **Lobo** » Fri Jun 28, 2002 10:29 am

My MTU is 150:)

spike · Post by **spike** » Fri Jun 28, 2002 4:13 pm

Thank you Mr. Lobo! Those are the lucky numbers. I feel like I won the lottery. My speed is consistenly above and beyond my supposed caps, and during congested hours too. God bless you sir.

Patapouf · Post by **Patapouf** » Fri Jun 28, 2002 5:12 pm

Originally posted by Lobo
Try:

MaxConnectionsPer1_0Server = 99
MaxConnectionsPerServer = 99
DefaultTTL = 32

ADSL also ?

Lobo · Post by **Lobo** » Fri Jun 28, 2002 5:24 pm

Try it and see, it wont hurt anything

Lobo · Post by **Lobo** » Fri Jun 28, 2002 5:25 pm

I just saw that Mr. Shat, glad to help but can de Mr.

Sag2734 · Post by **Sag2734** » Sat Jun 29, 2002 12:25 am

Are you still using Concast

Lobo · Post by **Lobo** » Sat Jun 29, 2002 12:52 am

It's BendoverCast now

, yes I'm still with them as they are the only ones here and yes I got the 3.5/384 now if MadDoc would just send me the money for the movies I sent him?

AznStyl · Post by **AznStyl** » Sat Jun 29, 2002 12:57 am

Hi Lobo, well i have tested out the new setting that you post earlier... I gotta admit it does go over my cap about 26-30 kbps .. but i have notice an error.. i don't know anybody else have or is it just me .. but the error was that .. when i log into my my computer my main one (I have 2, one main one and the other in the living room) it start out great.. but then about 10-20 minutes later it disc me and i can't log to the internet.. is it because i have a linksys workgrou switch ? or the setting does't work for linksys? anyone have the same problem as me?

Lobo · Post by **Lobo** » Sat Jun 29, 2002 1:04 am

It's not the settings, check Networking forum, sounds like security settings in firewall are to high

I use Linksy's NIC

kindredmwa · Post by **kindredmwa** » Sat Jun 29, 2002 12:03 pm

Hello,just wondering if i should try these #'s with my current RWIN..do you think it would help any Lobo?Or should i try a diff Rwin?Im using cablenut..
XP PRO,1.4TBIRD,512 DDR,Concast ISP...

TCP options string = 020405b40103030201010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 256960
RWIN Scaling (RFC1323) = 2 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 10278.4 kbps (1284.8 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4111.36 kbps (513.92 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 55 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

Lobo · Post by **Lobo** » Sat Jun 29, 2002 12:11 pm

Try it with your RWIN and the other

kindredmwa · Post by **kindredmwa** » Sat Jun 29, 2002 12:17 pm

OK,thanks.
If i put my rwin in(256960), do i use the same #'s as my rwin for defaultsend window, Global Max TCPWINDOW SIZE and MaxFastTransmit also,or do i leave them at 51100?Thanks for the quick responses!

Lobo · Post by **Lobo** » Sat Jun 29, 2002 12:57 pm

Experiment

kindredmwa · Post by **kindredmwa** » Sat Jun 29, 2002 1:48 pm

Ok I used your #'s and put MaxConnectionsPer1_0Server = 99
MaxConnectionsPerServer = 99
DefaultTTL = 32...and used 254 on DefaultTOSValue
Does this look right?any other rwins or values you suggest?

TCP string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 51100
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 51100
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 2044 kbps (255.5 KBytes/s) @ 200ms
Your RcvWindow limits you to: 817.6 kbps (102.2 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 23 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 11111110
Precedence (priority) = 111 (Network Control)
Delay = 1 (low delay)
Throughput = 1 (high throughput)
Reliability = 1 (high reliability)
Cost = 1 (low cost)

STICKDOG TEST:
Speed 1257(down)/107(up) kbps **
(At least 25 times faster than a 56k modem)
Finish.

Lobo · Post by **Lobo** » Sat Jun 29, 2002 2:44 pm

Work on TOS number

puhbare · Post by **puhbare** » Sun Jun 30, 2002 7:41 am

Thanks Lobo,

Tried it for my dsl and actually reached my max

kb2010 · Post by **kb2010** » Mon Jul 01, 2002 3:03 pm

how exactly do we modify all those settings on our pc??

mnosteele52 · Post by **mnosteele52** » Mon Jul 01, 2002 3:05 pm

Cablenut.

Lobo · Post by **Lobo** » Tue Jul 02, 2002 2:17 pm

Use both, Cablenut to save and the ease, SG for the pings, it explains how to in help thread below in sig

Lobo · Post by **Lobo** » Tue Jul 02, 2002 2:39 pm

I love this thing

Lobo · Post by **Lobo** » Tue Jul 02, 2002 2:51 pm

The settings are not the problem but I would put them on both puters

illestdynasty · Post by **illestdynasty** » Tue Jul 02, 2002 8:28 pm

Originally posted by Lobo
The settings are not the problem but I would put them on both puters

whats a good TOS value?

illestdynasty · Post by **illestdynasty** » Tue Jul 02, 2002 8:53 pm

TCP options string = 020405b401010402

MTU = 1500
MTU is fully optimized for broadband.

MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 51100
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 51100
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)

bandwidth * delay product:
Your RcvWindow limits you to: 2044 kbps (255.5 KBytes/s) @ 200ms
Your RcvWindow limits you to: 817.6 kbps (102.2 KBytes/s) @ 500ms

MTU Discovery (RFC1191) = ON

Time to live left = 52 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 11111110
Precedence (priority) = 111 (Network Control)
Delay = 1 (low delay)
Throughput = 1 (high throughput)
Reliability = 1 (high reliability)
Cost = 1 (low cost)

Lobo · Post by **Lobo** » Wed Jul 03, 2002 9:28 am

Between 0 and 255, happy rebooting, EvilAjax had 135 in his adjuster

Vic Mackey · Post by **Vic Mackey** » Wed Jul 03, 2002 9:37 am

hey lobo on the maxfasttransmit you have 2 or 51100. do you mean to pick either 2 or 51100 or enter it in cablenut "2 or 1500". which is the better number? also there are some boxes that you dont have any info for. some of them are empty. do i have to put anything in there?

Lobo · Post by **Lobo** » Wed Jul 03, 2002 9:43 am

Dont enter both numbers at same time either 2 or 51100, which is faster, depends on your connection, try both

Vic Mackey · Post by **Vic Mackey** » Wed Jul 03, 2002 9:47 am

ok thanks. some of the boxes are empty. you didnt provide any changes for them. do i have to enter something in them or what? for example, DisableAddressSharing is empty. what do i do about those?

Lobo · Post by **Lobo** » Wed Jul 03, 2002 9:53 am

Leave it blank, when blank it uses default setting

mnosteele52 · Post by **mnosteele52** » Wed Jul 03, 2002 10:47 am

hey lobo on the maxfasttransmit you have 2 or 51100

All of the following values should be the same:

DefaultReceiveWindow
MaxFastTransmit
GlobalMaxTcpWindowSize
TcpWindowSize

illestdynasty · Post by **illestdynasty** » Wed Jul 03, 2002 1:11 pm

IP type of service field (RFC1349)= 10000110
Precedence (priority) = 100 (flash override)
Delay = 0 (normal delay)
Throughput = 0 (normal throughput)
Reliability = 1 (high reliability)
Cost = 1 (low cost)

I've followed the instructions to a T and I still get the above message. What am I doing wrong?????

mnosteele52 · Post by **mnosteele52** » Wed Jul 03, 2002 1:19 pm

IP type of service field (RFC1349)= 10000110
Precedence (priority) = 100 (flash override)
Delay = 0 (normal delay)
Throughput = 0 (normal throughput)
Reliability = 1 (high reliability)
Cost = 1 (low cost)

Those are your TOS settings, they have nothing to do with the MaxFastTransmit value.

Lobo · Post by **Lobo** » Wed Jul 03, 2002 1:39 pm

For Win 2000 and XP DisableUserTOSSetting=0
Win 9x = 2

DefaultTOSValue Between 0 and 255, find a number, reboot heaven

Results show up on bottom of analyzer

illestdynasty · Post by **illestdynasty** » Wed Jul 03, 2002 1:40 pm

Originally posted by mnosteele52

Those are your TOS settings, they have nothing to do with the MaxFastTransmit value.

I had a tos setting of 134, what number would you recommend mnosteele52? My caps are 1500/128kb with no packet loss on my line, pings average around 50ms.

SG Broadband Community

W2K and XP settings for all CPU's

W2K and XP settings for all CPU's

huh