AGP Driving control/value

YARDofSTUF · Post by **YARDofSTUF** » Sun Mar 18, 2001 4:45 pm

Ok in my KT7a bios it has an option to set agp driving control to auto or manual, with manual i can change teh driving value, it says the minimumis 00 and the max is ff and default is da, will changing this to ff give more speed, or better performance?

YARDofSTUF · Post by **YARDofSTUF** » Sun Mar 18, 2001 6:55 pm

bumpy boomp^

Charlie · Post by **Charlie** » Sun Mar 18, 2001 7:09 pm

I don't really know.
I have a Radeon 64mb I'm running CC on those settings (Asus-A7M266) Did you add the [v-cache] settings? That helped me out alot.

Check out some of the post on this boardhere

YARDofSTUF · Post by **YARDofSTUF** » Sun Mar 18, 2001 7:12 pm

vcache, explain this too me please!

Charlie · Post by **Charlie** » Sun Mar 18, 2001 7:22 pm

Read about it Here
Let me know if you need any help

YARDofSTUF · Post by **YARDofSTUF** » Sun Mar 18, 2001 7:28 pm

i was thinking it was a vid card option in the bios, i have that done already, changed the agp settign gotta test it out.

ssjDoh · Post by **ssjDoh** » Sun Mar 18, 2001 11:09 pm

Careful with the drive settings!! It can seriously damage your card!!

I was reading a post on this on a diff forum.. I'll see if I can find it again. It'll have to be tomorrow cause I'm tired right now. Just leave it at default for now.

ssjDoh · Post by **ssjDoh** » Sun Mar 18, 2001 11:14 pm

hehe, well I did a quick search and I think this was the thread I was talking about CLICK ME!!

onetrueday · Post by **onetrueday** » Mon Mar 19, 2001 1:59 am

the agp driving control is the amount of power is supplied to your video card. I wouldnt touch it if you dont know what you're doing because you can pretty easily fry your board. So, what use could this give you? Well, if you overclock a retail radeon past 200mhz; then you might want to push the voltage supplied to the card a little bit. I read once that overclocking is an art form. I'm not artist, but this is something you have to be extra careful of.

YARDofSTUF · Post by **YARDofSTUF** » Mon Mar 19, 2001 3:26 am

Yes well i am reading these posts after setting it to the highest setting hahaha, and well the card was fine but windows didnt make it, so u formatted ME and installed 2K

oh well So from DA is DB the next power setting up?

ssjDoh · Post by **ssjDoh** » Mon Mar 19, 2001 5:20 pm

Originally posted by YARDofSTUF:
Yes well i am reading these posts after setting it to the highest setting hahaha, and well the card was fine but windows didnt make it, so u formatted ME and installed 2K oh well So from DA is DB the next power setting up?

read the link I supplied, they tell you what the values are (it's in hex)