tracert

jorg2007 · Post by **jorg2007** » Wed Jan 31, 2007 10:12 am

hows this tracert on my pc to
Tracing route to http://www.yahoo look i always get this problem on number 2 is this normal -ht2.akadns.net [209.131.36.158]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms http://www.routerlogin.com [192.168.0.1]
2 * * * Request timed out.
3 14 ms 14 ms 14 ms gi3-19.per-qv1-bdr1.ii.net [203.215.4.72]
4 73 ms 72 ms 72 ms gi0-14-0-0.syd-ult-core1.ii.net [203.215.20.2]
5 72 ms 72 ms 72 ms 202.139.19.33
6 270 ms 271 ms 272 ms 203.208.148.89
7 271 ms 275 ms 272 ms 203.208.186.10
8 277 ms 276 ms 275 ms g-1-0-0-p151.msr2.sp1.yahoo.com [216.115.107.79]

9 279 ms 277 ms 276 ms

jorg2007 · Post by **jorg2007** » Wed Jan 31, 2007 10:31 am

doesnt matter i had the filter off and everything disconnected and when i put the filter back on it stopped it ,i had a problem i was having a lot of drop outs and i thought it might have been the filter causing it

jorg2007 · Post by **jorg2007** » Wed Jan 31, 2007 10:31 am

Tracing route to http://www.yahoo-ht2.akadns.net [209.131.36.158]
over a maximum of 30 hops:

1 <1 ms <1 ms <1 ms http://www.routerlogin.com [192.168.0.1]
2 14 ms 13 ms 13 ms nexthop.wa.ii.net [203.59.14.16]
3 14 ms 14 ms 14 ms gi3-19.per-qv1-bdr2.ii.net [203.215.4.74]
4 71 ms 71 ms 71 ms gi0-14-0-0.syd-stl-core1.ii.net [203.215.20.64]

5 71 ms 71 ms 71 ms 202.139.19.37
6 232 ms 228 ms 237 ms 203.208.148.89
7 229 ms 230 ms 228 ms 203.208.168.246
8 228 ms 230 ms 229 ms g-1-0-0-p140.msr1.sp1.yahoo.com [216.115.107.53]

9 230 ms 230 ms 231 ms UNKNOWN-209-131-32-23.yahoo.com [209.131.32.23]

trogers · Post by **trogers** » Wed Jan 31, 2007 10:57 am

jorg2007 wrote:doesnt matter i had the filter off and everything disconnected and when i put the filter back on it stopped it ,i had a problem i was having a lot of drop outs and i thought it might have been the filter causing it

You placed a filter between your router and the modem?

jorg2007 · Post by **jorg2007** » Wed Jan 31, 2007 11:03 am

its a splitter filter that runs between the wall socket and the broadband 2 modem then the line goes straight to my laptop

mccoffee · Post by **mccoffee** » Wed Jan 31, 2007 11:06 am

You don't need a filter between the line and the modem that's the only connection that doesn't need the filter

jorg2007 · Post by **jorg2007** » Wed Jan 31, 2007 11:17 am

its set up simular to this one