Hey,
this is the output of the TCP/IP Analyzer.. see wat changes i should make..
Connection is PPPoE running DSL ..
thx
TCP options string = 020405840103030201010402
MTU = 1452
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be limiting your MTU regardless of Registry settings.
MSS = 1412
MSS is not optimized for broadband. Consider increasing your MTU value.
Default TCP Receive Window (RWIN) = 255600
RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
Unscaled TCP Receive Window = 63900
For optimum performance, consider changing RWIN to a multiple of MSS.
Other RWIN values that might work well with your current MTU/MSS:
519616 (MSS x 46 * scale factor of 8)
259808 (MSS x 46 * scale factor of 4)
129904 (MSS x 46 * scale factor of 2)
64952 (MSS x 46)
bandwidth * delay product (Note this is not a speed test):
Your TCP Window limits you to: 10224 kbps (1278 KBytes/s) @ 200ms
Your TCP Window limits you to: 4089.6 kbps (511.2 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 51 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
Help tweaking my connection..
could somebody not help me tweak my connection.. the problem is that when i downlaod anything then the downloads starts at its peak value adn then gradually goes down to 9kbps! after that it again starts increasing slowly and reaches a good value around peak value in about 5 mins! Is this becasue of some setting on my net and can i get a constant download rate?
i don know anything about all teh settings above but i'll be grateful if somebody can help..thx
i don know anything about all teh settings above but i'll be grateful if somebody can help..thx
Use the TCP Optimizer with these custom settings:
General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1492
TTL - 64
TCP Receive Window - 17424
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck
Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect
General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1492
TTL - 64
TCP Receive Window - 17424
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck
Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect