Help Me Tweak.. Down speed is 20kbs!!

fruitleader · Post by **fruitleader** » Thu Jul 21, 2005 4:43 pm

Help!! Im using Sbc Yahoo Dsl! Im paying for the 1.5mb dsl connection but im downloading at a ridiculous speed of 20kbs never faster. I need some good tweaking methods! Thanks guys and girls!

fruitleader · Post by **fruitleader** » Thu Jul 21, 2005 5:07 pm

TCP options string = 020405ac0103030001010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising MTU to 1500 for maximum throughput.
Default Receive Window (RWIN) = 63888
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 63888

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
511104 (MSS x 44 * scale factor of 8)
255552 (MSS x 44 * scale factor of 4)
127776 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 2555.52 kbps (319.44 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1022.208 kbps (127.776 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 51 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)

mccoffee · Post by **mccoffee** » Thu Jul 21, 2005 6:26 pm

Try thease in the sg optmizer below me to download and install

check - custom settings
network adapter selection -
check modify all adapters
maxmtu 1492
TTL - 64
TCP Receive blank
MTU Discovery - yes
Black Hole Detect - no
Selective Acks - yes
Max Dup ACKs - 2
TCP 1323 windows scailing is checked

Other Settings tab:

Max Connections per Server - 10
Max Connections per 1.0 Server - 20
Lan Browsing Speedup - optimized

Then select "Apply Changes" and reboot to take effect.

VERY IMPORTANT TO DO THE FOLLOWING:

1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need. For a stand alone pc all you need is Internet Protocol TCP/IP.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer and set your duplex mode to "auto". If you are using a router make sure you have the latest firmware.

4. Clean out your temporary internet files with CrapCleaner.

5. Power cycle your modem i.e. unplug it for at least 15 seconds.

6. Download, update and scan with SpyBot S&D 1.4 http://majorgeeks.com/download2471.html EXACTLY as I explain HERE http://lavasoft.element5.com/support/download& Ad-Aware SE 1.06 EXACTLY as I explain HERE to remove any spyware then install and update SpywareBlaster 3.4 http://www.javacoolsoftware.com/spywareblaster.htmlto stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES. If these 2 programs find a lot of things then please post a HijackThis 1.99.1 log for us to look at.

7. Make sure you do the faster web page tweak in our Help & Tips page.

8. If you have Zone Alarm as a firewall uninstall it and search your pc for the left over files.

9. Install Kerio Personal Firewall 2.1.5, it's FREE and uses next to no resources.

10. Do a FREE online virus scan from Kaspersky Labs.

11. Make sure you have ALL of the latest Windows Updates.

fruitleader · Post by **fruitleader** » Thu Jul 21, 2005 7:52 pm

What should my slider connection thing be at?

TeenInternetAddict · Post by **TeenInternetAddict** » Thu Jul 21, 2005 8:34 pm

The slider should be at 1500Kbps since you're capped at 1.5Mbps down.

fruitleader · Post by **fruitleader** » Thu Jul 21, 2005 8:40 pm

Ahh thanks for the tip TeenInternetAddict!

fruitleader · Post by **fruitleader** » Thu Jul 21, 2005 8:59 pm

Well, ima try cablenut now haha.. that could work!

mccoffee · Post by **mccoffee** » Thu Jul 21, 2005 11:11 pm

what modem do you have also do you own a router ??

How far do you live from the central office ??

fruitleader · Post by **fruitleader** » Thu Jul 21, 2005 11:29 pm

Uh yea, i own a router. Its a dlink router. Im on the wireless. My brother has the router!

My modem is uh.. some thing that the dsl company gave me. SpeedStream 5100 i think. I know my modem isn't the problem. I had it changed. And i don't know how far i live from the sbc crap. There's too many.. The closest one i have seen from my place is.. bout.. 4-5 miles from here.

mccoffee · Post by **mccoffee** » Fri Jul 22, 2005 12:07 am

is the modem in bridge mode also is the frimware is up to date on the router and all the ports mapped??

fruitleader · Post by **fruitleader** » Fri Jul 22, 2005 5:42 pm

Uh Please walk me through the bridge mode and the firmware is up to date. And hte ports mapped thing, walk me through that too thanks =D

mccoffee · Post by **mccoffee** » Fri Jul 22, 2005 6:51 pm

http://text.broadbandreports.com/faq/8722 bridge mode and the firmware instructions should be in the manual you can download it here http://support.dlink.com/ when you are selecting your router model number there should be some instructions on there in a hurry so i can't really dig for ya sorry

fruitleader · Post by **fruitleader** » Sat Jul 23, 2005 2:41 pm

What does bridge mode do?

mccoffee · Post by **mccoffee** » Sat Jul 23, 2005 4:46 pm

it disables the modem's router founction like port forwarding since you have a router you dont' need two routers you only need one.

The modem you have is what they call a brouter bridge + router so if you put in bridge it justs acts like a typical modem not router

fruitleader · Post by **fruitleader** » Sat Jul 23, 2005 5:17 pm

So do i do the bridging on my computer or on the main?

fruitleader · Post by **fruitleader** » Sat Jul 23, 2005 5:18 pm

I suppose talking on AIM or MSN is much faster..

AIM SN : ImSorryULose
MSN SN : ImSorryISuck@hotmail.com <-- Usually not on.

mccoffee · Post by **mccoffee** » Sat Jul 23, 2005 5:56 pm

why you need to talk on aim i just told you what you needed to do i'm on aim pepchild11