SiSoftware Sandra

[iflog]

I ran a check on my motherboard with Sandra Software and it had a couple things that said I needed fixed.


Warning W2513 - The AGP bus is disabled.
Fix: If you have an AGP mainboard, you should get a AGP video adapter to take advantage of it. An AGP adapter would greatly improve 3D performance. However, it should still have at least 8-16MB of local memory.



Tip T2525 - Current AGP data rate not optimal, i.e. less than chipset’s maximum AGP data rate. E.g. current AGP data rate is 1x while the chipset and the AGP card both support 2x. You should get better performance with a higher data rate but this depends on the application.
Fix: First, use the PCI & AGP Information module to confirm that the AGP card also supports the maximum chipset data rate. If it does not, don’t worry about it. For non-Intel chipsets, make sure you install the latest version of their AGP mini-drivers. You should update the video card drivers as well. Some non-Intel chipsets can only work in 1x mode with some video card.


Any ideas on what to do?