Hi , I am running WinXP pro on a AMD2200+ system. Could you please recommend Cablenut settings please? It is 4000/512.
TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 119 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000
Thanx,
Dave
W.O.W (Wide Open West) highspeed Cable Tweak Please!
DefaultReceiveWindow =512000
DefaultSendWindow = 65535
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 819200
MaxFastTransmit = 64000
MediumBufferSize = 150400
PriorityBoost = 0
SmallBufferSize = 12800
TransmitWorker = 32
FastSendDatagramThreshold = 1024
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = leave blank
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 1
TcpLogLevel = 1
TcpMaxDupAcks = 2
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = leave blank
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 240
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.
2. Open IE and select tools - internet options - connections -
LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.
4. Clear your temporary internet files.
5. Power cycle your modem, unplug it for atleast 15 seconds.
6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.
7. Make sure you do the faster web page tweak in Read1st link.
8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.
9. Install Outpost Firewall http://www.agnitum.com\ or Sygate Firewall http://www.sygate.com/ , both have FREE and Pro versions and are heads above ZA.
10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.
11. Make sure you have ALL of the latest Windows Updates
DefaultSendWindow = 65535
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 819200
MaxFastTransmit = 64000
MediumBufferSize = 150400
PriorityBoost = 0
SmallBufferSize = 12800
TransmitWorker = 32
FastSendDatagramThreshold = 1024
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = leave blank
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 1
TcpLogLevel = 1
TcpMaxDupAcks = 2
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = leave blank
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 240
1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.
2. Open IE and select tools - internet options - connections -
LAN settings, make sure NOTHING there is checked.
3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.
4. Clear your temporary internet files.
5. Power cycle your modem, unplug it for atleast 15 seconds.
6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.
7. Make sure you do the faster web page tweak in Read1st link.
8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.
9. Install Outpost Firewall http://www.agnitum.com\ or Sygate Firewall http://www.sygate.com/ , both have FREE and Pro versions and are heads above ZA.
10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.
11. Make sure you have ALL of the latest Windows Updates
Comptia a+ n+
Thanx for the quick response.
Here is the new analysis.
Does it seem right.
Thanx Again,
Dave
TCP options string = 020405b40103030001010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 55 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 11110000
Precedence (priority) = 000 (routine)
Delay = 0 (normal delay)
Throughput = 1 (high throughput)
Reliability = 1 (high reliability)
Cost = 1 (low cost)
Here is the new analysis.
Does it seem right.
Thanx Again,
Dave
TCP options string = 020405b40103030001010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64240
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):
Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 55 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 11110000
Precedence (priority) = 000 (routine)
Delay = 0 (normal delay)
Throughput = 1 (high throughput)
Reliability = 1 (high reliability)
Cost = 1 (low cost)
