Tweak pls?

[AznStyl]

Hi all, Jux got my cable service back. Its been a long time since my last tweak and I pretty much forgot the formulas for the cablenut. Can any body give me a new number for 3000/300 Cableone?

Thanks in Advance

[mccoffee]

Try the following in cablenut

DefaultReceiveWindow =384000
DefaultSendWindow = 49152
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitOnReceives = 0
GlobalMaxTcpWindowSize = leave blank
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 1
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfOpenRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = leave blank
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 92





Co/o manosteele52

. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

2. Open IE and select tools - internet options - connections -
LAN settings, make sure NOTHING there is checked.

3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot 1.2 http://beam.to/spybotsd & Ad Aware 6.0 http://www.lavasoftusa.com/support/download to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

7. Make sure you do the faster web page tweak in Read1st link.

8. If you have Zone Alarm as a firewall uninstall it then visit Zonelabs.com for further instructions on removing it's left over junk.

9. Install Outpost Firewall http://www.agnitum.com\ or Sygate Firewall http://www.sygate.com/ , both have FREE and Pro versions and are heads above ZA.

10. Scan for viruses with your antivirus app, if you do not have one get one IMMEDIATELY, AVG 6.0 http://www.grisoft.com/us/us_dwnl_free.php is an excellent FREE AV app.

11. Make sure you have ALL of the latest Windows Updates.

[AznStyl]

Hi mccoffee, I have jux tested out ur tweak.. it seem that I can get only 2500 out of 3000. I have try the css addon from cablenut (3000/384) and it seem to get higher speed from it (2800). Don't know why..

[mccoffee]

Windows default has a self tunning stack with those settings windows will adjust the rwing past 65535 if needed for you. It works on most configurations once in awile the older way works better which is a hard coded rwin.

[AznStyl]

Well after I played w/ the addon from cablenut. I find that the 3000/256 setting is the fastest so far. I've tested my speed on one of the ftp that in mnosteel52 tips thread. It download @ 392 kp/s and slowly dropping. I download it to halfway but the download is to fast and b4 I finish it.. it was still 380 kp/s n slowly dropping... so I can't tell if that setting is stable for me or it jux start out fast and slowly dropping. I don't know....

[mccoffee]

All transfers do that start out fast then slow it's just how ftp works