XP Pro, ADSL, Earthlink, 1.5/256, PPOE, Router.
BTW, if you were looking at one of my other treads and wondering why I have two different lines, this isnt my main one.
TCP options string = 020405840103030201010402
MTU = 1452
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.
MSS = 1412
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.
Default Receive Window (RWIN) = 255552
RWIN Scaling (RFC1323) = 2 bits (scale factor of 4)
Unscaled Receive Window = 63888
For optimum performance, consider changing RWIN to a multiple of MSS.
Other values for RWIN that might work well with your current MTU/MSS:
519616 (MSS x 46 * scale factor of 8)
259808 (MSS x 46 * scale factor of 4)
129904 (MSS x 46 * scale factor of 2)
64952 (MSS x 46)
bandwidth * delay product:
Your RcvWindow limits you to: 10222.08 kbps (1277.76 KBytes/s) @ 200ms
Your RcvWindow limits you to: 4088.832 kbps (511.104 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 54 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000
I need tweaking.
Re: I need tweaking.
Originally posted by ps2wiz
BTW, if you were looking at one of my other treads and wondering why I have two different lines, this isnt my main one.
Meaning that this post doesnt have any relation to my other post. This is a seperate DSL line.
Will some one please adise me with what to set and where based on the stated configuration.