How big is your....

chimdogger · Post by **chimdogger** » Tue Aug 05, 2003 3:09 pm

Overclock?

I was able to get 500 mghtz out of a pentium 2.4c chip. Is this good for an overclock with stock fans, heatsinks?

jumpingrat · Post by **jumpingrat** » Tue Aug 05, 2003 3:19 pm

I have run my 2.4 at 2.8 for 2 months with only an additional case fan, and have had no problems. It does run a bit hotter but it levels out and seems to be fine. Just remember to keep everything clean and well ventilated, other than that...???

tHE_0ne · Post by **tHE_0ne** » Tue Aug 05, 2003 3:27 pm

7 inches

oh wait

1.4 ghz to 2.0 ghz amd and there is room for more

Set · Post by **Set** » Tue Aug 05, 2003 3:34 pm

2.53b @ 3ghz Foldload @ 35C Cooled with a p4 spark

Bababooey · Post by **Bababooey** » Tue Aug 05, 2003 4:01 pm

1.73ghz XP to 2.4ghz...... havent tried maxing it out yet.

Post by **YeOldeStonecat** » Tue Aug 05, 2003 4:34 pm

People are getting 3.2 GHz and higher from the 2.4C with stock Intel HSF's.

maroon · Post by **maroon** » Tue Aug 05, 2003 4:51 pm

550mhz from a XP 1700 "B". It's got more in it, but I haven't pushed it yet.

At $45, it's like stealing.

Post by **YeOldeStonecat** » Tue Aug 05, 2003 5:15 pm

Thinking back....remember those Celeron 300a's? They'd almost always clock to 450, 464, even 502. A few lucky peeps obtained 558.

The climb in megahertz isn't all that much...but the percentage of overclock is insane! Imagine bringing that same percentage increase to todays CPU's?

extreme · Post by **extreme** » Tue Aug 05, 2003 6:04 pm

Sig.

But since i got water cooling on the thermaldragon, i hit 3.6 last night but did test it at full load.

YARDofSTUF · Post by **YARDofSTUF** » Wed Aug 06, 2003 8:52 am

1300mhz total over all my cpus

deleted_acct · Post by **deleted_acct** » Wed Aug 06, 2003 9:11 pm

not to brag or anything but about 13" . Oh wait were talking about overclockin.

lansens · Post by **lansens** » Wed Aug 06, 2003 10:20 pm

3.125ghz with stock cooling from a 2.4c. I think this chip has more potential!

Shagster · Post by **Shagster** » Wed Aug 06, 2003 10:29 pm

whats "overclock"?

Rivas · Post by **Rivas** » Wed Aug 06, 2003 10:30 pm

dont need to oc

Shagster · Post by **Shagster** » Thu Aug 07, 2003 11:11 am

Originally posted by Chillinhh
not to brag or anything but about 13" . Oh wait were talking about overclockin.

Thats more along the lines of disgusting...heh.

I haven't measured mine in a while.

axtrader · Post by **axtrader** » Thu Aug 07, 2003 7:01 pm

P4 2.0A @ 2.9GHz. I had it running at 3.0GHz stable (150FSB) on a GA-8IHXP, but I wasn't comfy with it there. So I keep it at 145FSB and I'm a happy camper.

stEVIL · Post by **stEVIL** » Sun Aug 10, 2003 12:20 am

W2Kpro sp3
8RDA+ (3507.BIN)
AMD xp2700 (12.00x200fsb) (Swiftech MCX 462+ SUNON 6500rpm 80mm )
2X512 mb Twinmos DDR3200 (windbond) ( 6-3-3-2 )
Asylum Gf4 T4600 (det 44.03s) (locked at 67mhz)
80 gig Maxtor 7200 (8mb cache) ATA133
ALC-650E AC97On board sound
LiteOn 52x24x52 CDRW
MadDog 16x DVD x 48
ViewSonic 19in PF790 .25
Antec S-1240 Full Tower
Antec 550W True Control ps
SB 3100 cable modem
D-Link DL704 router
NVidia nForce MCD Networking Controller

loop2kil · Post by **loop2kil** » Sun Aug 10, 2003 1:39 am

right now stable at 3.244 ghz @1.6v but i think it can go a little higher.

Shagster · Post by **Shagster** » Sun Aug 10, 2003 1:41 am

Originally posted by loop2kil
right now stable at 3.244 ghz @1.6v but i think it can go a little higher.

Nope, your topped out my friend

BaLa · Post by **BaLa** » Sun Aug 10, 2003 2:27 am

25 inches...

Shagster · Post by **Shagster** » Sun Aug 10, 2003 2:45 am

Originally posted by BaLa
25 inches...

No one said anything about garden hoses.

cookyr · Post by **cookyr** » Sun Aug 10, 2003 11:41 am

how do you up the power then as im new to all this

LT-73 · Post by **LT-73** » Sun Aug 10, 2003 12:24 pm

Originally posted by Shaggy
No one said anything about garden hoses.

Nebulous:

Stock- 1730Mhz
Oc'ed-2424Mhz
Gain- 694Mhz

Neucleus:
Stock-1730Mhz
Oc'ed-2428Mhz
Gain- 698Mhz

extreme · Post by **extreme** » Sun Aug 10, 2003 12:51 pm

Nope, your topped out my friend

shaggz may i ask, how do you know he topped out? You know all procs are diffrent. Hell he could get another 100mhz our of it.

LT-73 · Post by **LT-73** » Sun Aug 10, 2003 1:14 pm

99.9% of a P4 2.4Hgz chip is 3.3Ghz and that's with good cooling. Maybe with a prommy he can get 3.4 maybe even 3.5 tops. With LN2 it could be pushed close to 4Ghz.