Yo My Upload Is 937 But My Download Is 139

trupimp574 · Post by **trupimp574** » Tue Jul 29, 2003 4:29 pm

ight it goes like this my upload speed is TO HIGH BUT MY DOWNLOAD IS TO LOW HOW CAN I FIX IT ANY HELP OUT HERE ?????

mccoffee · Post by **mccoffee** » Tue Jul 29, 2003 4:41 pm

power cycle the modem shut it down for about 2 mins and power it back up again.

trupimp574 · Post by **trupimp574** » Tue Jul 29, 2003 4:55 pm

i did alot of times befor but it wonr work it give me the same **** over and over they say u can fix that is there any way to fix it i have hp 2.60 ghz 512 mb ram and 120gb hd i am new at this **** and i dont really know wut i am doing

mccoffee · Post by **mccoffee** » Tue Jul 29, 2003 5:01 pm

who is ur isp and ur adveritsed speed.

trupimp574 · Post by **trupimp574** » Tue Jul 29, 2003 5:04 pm

I USE OPTIMUM ONLINE

trupimp574 · Post by **trupimp574** » Tue Jul 29, 2003 5:05 pm

TCP options string = 020405b40103030001010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.

Default Receive Window (RWIN) = 17520
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 17520

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
64240 (MSS x 44)
bandwidth * delay product:

Your RcvWindow limits you to: 700.8 kbps (87.6 KBytes/s) @ 200ms
Your RcvWindow limits you to: 280.32 kbps (35.04 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.
MTU Discovery (RFC1191) = ON
Time to live left = 55 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000

YO THIS WUT I GOT IN THE TEST I TOOK YO I DONT KNIW **** THE ONLY THING I KNOW IS THAT MY **** IS TO SLOW TO DOWNLOAD SOMETHING

mccoffee · Post by **mccoffee** » Tue Jul 29, 2003 5:10 pm

Try the following in cablent dont forget to save to registry and reboot after you mad the changes DefaultReceiveWindow = 921600
DefaultSendWindow = 921600
DisableAddressSharing = 1
InitialLargeBufferCount = 100
InitialMediumBufferCount = 240
InitialSmallBufferCount = 320
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitOnReceives = 0
GlobalMaxTcpWindowSize = 128480
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 1
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfOpenRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 128480
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 92

trupimp574 · Post by **trupimp574** » Tue Jul 29, 2003 5:13 pm

YO i am new at this **** i have to co to cablenut and do the setting there ???

mccoffee · Post by **mccoffee** » Tue Jul 29, 2003 5:18 pm

Download cablenut below me and install after it's done installing run that program and enter the values manually when done click on save to registry and reboot.

trupimp574 · Post by **trupimp574** » Tue Jul 29, 2003 5:32 pm

so that should fix my problem even my download speed cuz it was mad low but my upload was high

mnosteele52 · Post by **mnosteele52** » Tue Jul 29, 2003 7:05 pm

Hi trupimp574 welcome to Speedguide

. Please only start one thread when asking about the same connection, you have 4 or 5 threads going right now. And please stop saying YO, it's quite rude. First download CableNut from my signature then use the following settings:

DefaultReceiveWindow = 921600
DefaultSendWindow = 128000
DisableAddressSharing = 1
InitialLargeBufferCount = 200
InitialMediumBufferCount = 480
InitialSmallBufferCount = 640
LargeBufferSize = 819200
MaxFastTransmit = 64000
MediumBufferSize = 150400
PriorityBoost = 0
SmallBufferSize = 12800
TransmitWorker = 32
FastSendDatagramThreshold = 4096
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 128480
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 1
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 128480
MaxConnectionsPer1_0Server = 20
MaxConnectionsPerServer = 10
DefaultTTL = 64
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 90

VERY IMPORTANT TO DO THE FOLLOWING

1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. Make sure you have the latest drivers for your NIC from the manufacturer. Set your NIC duplex mode to 10mb half duplex for Cable, for DSL it is ISP dependent unless you are using a router, if so then set it to 100mb full duplex for both Cable & DSL (the instructions are in my Help & Tips link). If you are using a router make sure you have the latest firmware.

4. Clear your temporary internet files.

5. Power cycle your modem, unplug it for atleast 15 seconds.

6. Download and update then do a scan with SpyBot 1.2 & Ad Aware 6.0 to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES.

7. Make sure you do the faster web page tweak in my Help & Tips link.

deleted_acct · Post by **deleted_acct** » Wed Jul 30, 2003 12:46 am

mnosteele52 Didnt know you were still around since your only in the broadband forums. Glad to see your still around.

OD_Hunter · Post by **OD_Hunter** » Wed Jul 30, 2003 11:54 am

LMAO!!!! Thnx steel for telling him to stop syaing"Yo" i told him on the other post and he gets mad at us.. when we are trying to help him...