SG Broadband Community

1668

I heard about database stress test. But never know about broadband stress test. Did anyone know how to do this test? do I need any tools to do this?

Thank you

1668

Change already,but that thing still following me.

1668

I think my laptop is under attack since i got the trojan house last week. I re-format my laptop already. but now, my modem(aztech DSL3100R with later firmware) detected winnuke/syn flood/ip spoofing everytime i connect to Internet. And my laptop power off intermittent. When I am in the office or I ...

1668

Yes, My WAN is set to dynamic IP

1668

I am using modem router connecting to my ISP. everytime if i keep it online for long time(more then a weeks or a months) then i disconnect it(or sometime disconnect by itself or power failure). then i can not connect it again untill i call the ISP for deleting my connection session. Is this a ...

1668

I did it and it is working. Thank you so much guys.

1668

I have a 3COM Office Connect Wireless 11g Cable/DSL Router(3CRWER100-75) now. Can this device be configure to work as an AP?

1668

I have a scenario like this, I have an existing wired router and modem in a Lan network. I would like to expend my network with wireless. Which hardware is suitable in order to connect to my existing network, Wireless Router or Access Point?

Thank you

1668

Thanks guys, I got it.

1668

I am configuring 2 wireless router/AP in a WLAN. I am wonder how the SSID and IP address work for each others. Any expert please check my configuration is it correct?

wireless router/AP 1
- SSID = "AP1"
- Authentication = "WPA"
- Network key = "111111111111"
- IP range from 192.168.1.2 to 192.168 ...

1668

I have a SMC SMC7908VoWBRA, recently setup. But the wlan signal keep droping. I found this article in FAQ session.

Wireless networks' performance is affected by a variety of factors, such as the distance between nodes, walls/obstacles that obstruct direct line-of-sight, and other wireless traffic ...

1668

ok, thank you for your suggestion. The router I used is without remote management. The router is down now. Seem I have no choice, and I have to travel to that router and see what happen.

Thanks again

1668

I have a router behind a normal boardband modem. And I have a fixed IP address from ISP. How can I troubleshoot my router through Internet?

thanks in advance

1668

Is there a risk being hack by using this port?

1668

sorry, I miss leading you guys.

Recently, I notice that is nothing to do with VPN. I thinks is my Internet connection problem. My VPN have no problem if I using dailup. The actual scenario is I can not connect to the Internet in order to connect to my VPN. I notice that is a error message "DNS can ...

1668

Normally, What is port 53 for?

Thanks

1668

I have tested, the port I need is open. I notice that is a 3rd party software(Custom Application) cause this problem(may be not compatible). If I by pass that software and directly plug in my cable to router, I can connect VPN, and can browse to FTP and Https protocol. Only HTTP can not browse ...

1668

I have a VNP connection problem. I can connect from my home, but I can't connect from my company. I guest is the firewall block the connection. How to I open a port for from the firewall? and how to detect which port am I using for the VPN connection?

Thank you

1668

Sorry, I forgot to give my information.

I did not setup any firewall nor router. I have Proxy server only. all user was access to Internet through winsock.

1668

I have a problem with Kazaa(spyware). some of the employee in my company are using kazaa to download the porn movie and MP3. I uninstall it. later they install back again. And they used up all the bandwidth. I'm using NT server and all client are using Win98. Any system admin here? can you please ...

1668

I still can't find out what is this IP address for, and who own this.

I didn't use any router and PDA device. but I have a network printer and switches.

Is it some thing like virtual PC?

1668

I have detect my computer have the following port is open. 80,21 and 137. if it is open , is it easy to hack in? How do I close it or hide it?

Can Zone alarm do this or any other choices? I don't want to use zone alarm. cause it will used almost 25% of my 256MB memory

thanks in advance

1668

Recently I donwload a shareware name Commview. It can monitor the network activities. My fixed LAN IP range is from 192.168.0.130 to 192.168.0.185. The problem is, with this software, I notice there have an extra IP in my LAN. which is 192.168.0.191 with the the MAC address ff:ff:ff:ff:ff:ff. and ...

1668

As I mentioned above. The is the setting I have done for web proxy

Protocol ; Enable Access Control
1. FTP Read ; Everyone
2. Gopher ; none
3. WWW ; Everyone
4. Secure ; Everyone

Or, do I need to add every user insteed of "Everyone" ?

If I did not install the proxy client to winXP, here is my ...

1668

But, In my webproxy have 4 type of protocol only. I can't add or delete that protocol.

1. FTP Read
2. Gopher
3. WWW
4. Secure

and winsock proxy can add protocol manually. So, How to configure?

I don't have NAT device/Server nor Firewall. I was trying to find a NAT to replace the proxy server. but ...

1668

I have a Win XP as a client, need to connect to NT server with a proxy server behind. But the problem is, I can't install Proxy client to windows XP. Is the Win XP include a proxy client. If yes, How to configure it?

thank you

1668

Do you guy play Ragnarok and Hellbreath?

Why I can't connect to their server? (I was behind proxy server, and all port are open)

Can anyone please help...

Than you in advance

1668

Sorry, The NT server is for Internet Sharing. As you said, I need 2 group. Group A and Group B, But What I want to control is not a user, but is Computer. Let say,

Computer Group A
Internet Access: Allow
File & Print Share: Allow
LAN Browse to Group B: No

Computer Group B
Internet Access: Allow ...

1668

To Expert,

1. Can I have two seperate LAN in a single NT server? ( I means One NT server control two seperate LAN)

2. Do I need to create two domain name?

3. Do I need additional NIC? ( currently I have two in the server, One is for Broadband, And another one is for LAN)

Any expert please help ...

1668

Nope, not this one. 3Com® SuperStack® II Switch 610
Product # 3C16954-US

Mime is 3Com® SuperStack® II - Product # 3C16465A, I don't know the model

I try to search the product number, but not in the list.

1668

1. My ISP is "TM Net, Malaysia" , Advertise speed is ADSL 386kbps/128kbps.

2. 1st five test Average = 280kbps/101.2kbps Transfer rate = 34.18
2nd five test Average = 280.2kbps/100.4kbps Transfer rate = 34.2

3. My O/S is Win ME

1668

I know what you said. and I know what to do now. Thank you so much, Bob.

1668

This is my result from the TCP/IP Analyzer, and what should I change now

TCP properties for IP = xxx.xxx.xxx.xxx ()
Browser/OS = Mozilla/4.0 (compatible; MSIE 6.0; Windows 98; Win 9x 4.90)
Note: Read the FAQ if the above is not your IP address.

TCP options string = 0204052a01010402

MTU = 1362 ...

1668

Yes, this is for my company used, I have a cisco router with ethernet adapter too. But I did not use it, because no one in my company know how to configure it. What I know this router is configured for leased line at 128mb. And we are changing to ADSL at 1.5mb now. that is why, I try to take out the ...

1668

I'm using WIN ME, and I use Cable Nut to tweak my O/S, Its seen like no differance. My Internet speed is ADSL386.

Any expert here can suggest me what and where to tweak?

1668

I have a T1 DSL. can this imporve the access speed, if I add a router?

cause someone told me NT server can act like a router. If it is true, then which one is better? Using existing NT server as a router or setup a router hardware?

Thank you

1668

I used 3Com SuperStack II 10/100. I can't find this model in 3com website.

1668

I have a NT4.0 server and 3 switches. Do I need a router for LAN?

Thank you in advance

1668

How to do trunking with my three switches with no router?

Thank you in advance

SG Broadband Community

Search found 39 matches

Broadband Stress Test

Security issue: Power Off intermittent

Broadband Always On Problem?

Wireless Router vs Access Point

More then 1 wireless router or AP?

WLAN signal drop

Connect to router via internet

What is port 53 for?

Connect to VPN

Some admin site problem

An Open Port Detected

Unknown IP in LAN

About Proxy Server

Ragnarok and Hellbreath

Two Seperate LAN Problem

No differance, after tweak

Need Router for LAN?

Trunking??