SG Broadband Community

zillah

Thx Philip

3) Are you connecting to the proper port? I am not familiar with this particular device, but usually they only allow access on certain interfaces.
4) The admin service may have simply locked, I would power-cycle it if possible.
Those are not applicable as I can access the device but ...

zillah

When I assigned my laptop ip address 192.168.22.10/24

Sorry Philip this is a typo meant to be 192.168.255.10

zillah

Dear folk

Using a laptop to access Nokia AirScale baseband we normally assign 192.168.255.130/24 and no issue for accessing web interface of the device

When I assigned my laptop ip address 192.168.22.10/24 access won’t be granted to access the web interface

Connected is direct from the laptop ...

zillah

Noted
Thx Philip

zillah

Thx Philip
You guess it might not be doable ?

zillah

https://www.speedguide.net/forums/viewtopic.php?t=291910-ASUS-Router-Merlin-showing-two-differnt-WAN-ip-address

Hi

I had DDNS setup on my ASUS RTAC5300 Merlin firmware as per attached snapshots

My DDNS from no-ip is linked to the CGNAT ip address not public ip address

https://imgur.com/a ...

zillah

This is usually practiced by smaller ISPs

Differently this is my case now it makes seance
Thx Philip

zillah

Hi Philip

Thanks for your help and I have to admit learning a lot from your knowledge

The 103.212.x.x. IP is your actual external public IP address that is seen onto the internet.
Yes no doubt

The 100.97.x.x IP address is a private address, generally reserved for NAT between internet service ...

zillah

Dear folk

I have got ASUS ROUTER RTAC5300 with Merlin firmware latest version

Before I connected to VPN and thorough the website

https://whatismyipaddress.com

it was showing public ip address different from the "General" --> "Network Map"

And now when I connected to VPN it is still showing ...

zillah

Maybe it is just that firmware, maybe the list only shows dynamically allocated IPs in the DHCP range?
I think it is a bug in the firmware and yes it does show dynamically allocated IPs
Even I can't see the printer which has static ip and while I was printing (means there is activity) I was ...

zillah

Dear folk
Main router at home is ASUS RT-AC5300 Merlin (v384.19) this router has :
- ASUS PoE switch (192.168.10.2) connected wired to it
-Two other routers connected wired to it as well acting as access point to extend the wireless signal (192.168.10.3 & 192.168.10.4)
On ASUS RT-AC5300 under ...

zillah

What I did I downgraded the firmware from V1.0.3.50_1.0.1 to V1.0.3.44_1.0.1 (one version older) and it worked fine now can change ip address disable DHCP,,,etc

zillah

connected wired
tried to change one by one
Tried changing LAN first before DHCP no joy as router showing old ip address although i did unplug and plug power for the router
Then tried to disable DHCP first before LAN and obviously i need to set static ip to my computer but no joy
Again same unplug ...

zillah

I am getting error when changing LAN ip address /disable DHCP
I didn't get the error when I changed the router to AP mode

zillah

Tried different browsers no joy
Download firmware again and uploaded to the router still same issue
6 times so far reset been done and still no joy

zillah

Dear All

I have seen many thread like the one I am posting now but I couldn't find a cure ,,,,may be I overlooked or it is hiding somewhere on net I didn't find it
I am trying to set Netgear Nighthawk D8500 with Firmware Version V1.0.3.50_1.0.1 as an Access Point and I was looking to change the LAN ...

zillah

There may be a setting in the VPN configuration somewhere that allows you to access local LAN resources. I would try it, even if the assigned VPN IPs are in a different subnet, the router is probably setting some type of route to access local resources on the LAN.
That is right we have to add a ...

zillah

Thx Philip

Your LAN IP address range is 192.168.0.101 - 199, however that is most often configured with the subnet mask 255.255.255.0 (CIDR notation 192.168.0/24).
Clear

This means all 192.168.0.* IPs (255 of them) would be assigned to your LAN, whether they are using DHCP or not.
Make sense ...

zillah

Dear folks

https://www.telstra.com.au/content/dam/tcom/small-business/bundles/pdf/telstra-gateway-prov7610-configuration-guide.pdf

I have got V7610 Netgear GATEWAY and I followed the attached document to setup Client to Gateway VPN page 5 and 6 says :

In the VPN remote virtual IP field ...

zillah

I would use a wired LAN port to try to connect to the admin panel,

I tried that and it failed

factory reset is usually the next step

I guess yes

the ADSL modem you may run into other configuration issues afterwards.

Shouldn't be a problem

Regards

zillah

Does rebooting the router work?
Unfortunate not

Sometimes the cable/dsl modem is at 192.168.1.1 and a secondary WiFi router is at a different IP ?
It is all in one box modem and adsl router.

What is the gateway IP when you do "ipconfig /all" in command prompt, is it 192.168.1.1 ? (
https ...

zillah

Do different web browsers come up with the same 403 error?

Firefox and Chrome

https://imgur.com/a/KJ5MjTR

Tried both ports 80 & 8080 no joy

Didn't let me in
http://www.routerlogin.net

zillah

Philip I have an issue
I was trying to troubleshoot and report back but I run into another issue
Via a team viewer I logged in into a remote computer and from that computer I can ping the ip address of its LAN's router 192.168.1.1 (I guess it is Netgear but not sure) and I pinged the ip address of ...

zillah

Thanks Philip
I will check that and report back

zillah

Dear folk

I have a printer HP Laser Jet M5035 MFP connected wired to an ADSL router and desktop windows 10 home connected to the same router wirelessly.
The printer can't send a scanned document to a shared folder on the desktop.

But if I connect the desktop wired to the same router everything ...

zillah

Maybe these links will help someone else searching for what I posted
All good
Thx for sharing

By the way I have been working in DataCentre (telco companies and Business Customers ) and GSM huts belong to 3 different Telco companies for 10 years all i have been terminating is straight through and ...

zillah

Thx Norm

I don't think type of Ethernet cable wiring layout (Rollover , straightthrough and crossover) has something to do with the terminology cross connect

Yes there is a common word which is : cross in both terminologies crossover and cross connect but I guess it is just coincident

zillah

Thanks Philip

zillah

Dear folk
I have been doing some research on what does “ cross connect ” mean and this is one of term that i have yet to wrap my mind around.
I would appreciate if someone in the field could explain in simple terms what exactly does it mean ? Does it have different meaning depends where it would be ...

zillah

Change the channel of the Access point..

Thx Philip that was the issue

Is it transmitting in the 2.4GHz range?

Yes

zillah

Dear folk

Recently TP Link USB wireless TL-WN823N V2 lost its connection to home SSID,,,,I am using windows 10 64 bit

1-SSID not hidden as all iphone mobiles can see and connect to SSID
2-Router not far away from TP Link USB
3-TP link USB can see neighbor SSIDs, but not mine!!!
4-TP link ...

zillah

Dear Experts

I posted this question on printing forums since Nov 12 but I haven't got answer yet

At work we have got Xerox DocuCentre-V C2263. Initially my laptop was connecting to the printer and I was able to print, and the printer ip address was 192.168.3.22

Recently we moved the office to a ...

zillah

Noted
Thanks for your help and support

zillah

Thanks YeOldeStonecat
finally it worked I don't know how !!!
but definitely SMB1.0 should be enabled otherwise won't work as i did test that

Edit
----
((The real answer is "Upgrade your MFPs so they support SMBv 2 and 3."))

Is it safe to update the firmware of the printer or it might create ...

zillah

Hi mate

I did enable V1 and V2 but no joy

I guess you were referring to below before enabling it ?Weren't you ?

https://imgur.com/a/0NY9hdE

Regards

zillah

Dear Experts

I have got HP LaserJet M5035 MFP Series printer that initially was able to scan documents to shared folder on 2xDesktops (PC1 and PC2) windows 8

I upgraded PC1 (but not yet PC2) only from windows 8 to windows 10 pro and I tried to copy the same setting as it was on windows 8

Created ...

zillah

What is the range of the DHCP server?

Range from 205-249
https://imgur.com/a/Bungfwf

I wouldn't rely on it to always be correct.

I see

zillah

Philip

Please have a look at the result below

Ping from a PC within the same network didn't show static ip addresses for printer and alarm control system within ARP table

Then I did ping both addresses 192.168.0.200 (printer) and 192.168.0.251 (Alarm system) as a result both of them shown in ARP ...

zillah

Thanks Philip for your help

zillah

You can then check if that new static IP shows in your router's client list.
The ip address 192.168.0.200 in the snapshot attached is for an industrial printer and it is a static ip address as this ip address had an activity (traffic sent and received)

it may only show them when there is ...

SG Broadband Community

Search found 117 matches

Laptop access Nokia AirScale baseband has ip address range limit

Can't access router remotely via ddns link

This is usually practiced by smaller ISPs

carrier-grade NAT

ASUS Router Merlin showing two differnt WAN ip address

ASUS Merlin not showing static ip addresses

400 Bad Request This server does not support the operation requested by your client

V7610 Netgear BUSINESS GATEWAY VPN pool ip address understand concept

Desktop and a network printer wired and wireless issue ?

What does " cross connect " mean ?

Wireless USB can't connecte to home SSID

DocuCentre-V C2263 how to find its ip address

HP Printer send to shared folder issue