SG Broadband Community

i took off xp and whent back to win 98 put on the opt fo 98 but in the network selection its reading dialup adapter im on cable do i need the dial up??? tryed to get it to read the network card but it well not take thank you

Try reinstalling the win98 drivers for your PCI card. Also does your card just not work or does the system not see it?

If your NIC is not listed try redowloading Optimizer on top of other and reboot

Right Click on My Computer, Device manager, adapters, see if your NIC card is listed, if not go to makers web site and download and install driver for NIC

its all there but in the optimizer all it ill do is reads the dial up adapter my nic card is there in the sg tcp optimizer in the drop down but when you hilight it and reboot it gos back to the dial up do i need to undo the win dial up adapter

Right click on my computer, go to device manager, adapters, remove 56K adapter and reboot, Windows will discover it again but maybe this will solve problem

Originally posted by bknight
its all there but in the optimizer all it ill do is reads the dial up adapter my nic card is there in the sg tcp optimizer in the drop down but when you hilight it and reboot it gos back to the dial up do i need to undo the win dial up adapter

The pull-down menu in the Optimizer just lists the adapters, the first one is highlighted however there is no implied meaning behind it... If you choose the appropriate network adapter and tweak its settings, that's where they are applied.

You can doublecheck your settings with the TCP Analyzer, or the "Current settings" in the Optimizer.

ok thankyou all ill just live it the way it is then well at least im running at 1.8 235 seams to be optimiz then thanks all for help