Page 1 of 1
What do you think of my case project?
Posted: Thu Apr 25, 2002 7:33 pm
by tHE_0ne
simple, but good since I have no room for a intake fan (lots of stuff in the way and case has no holes)
and i know i do suck at Paint
Posted: Fri Apr 26, 2002 12:10 am
by Ken
Can you put an intake in the case floor?
Posted: Fri Apr 26, 2002 12:23 am
by Brent
what about on the side panel?
Posted: Fri Apr 26, 2002 3:40 pm
by AoDLiQuiD-M3tH
LOL thats why he has the tubing to bring the air down unless im mistaken .......
Posted: Sat Apr 27, 2002 1:12 am
by tHE_0ne
my exhast fan is small
and i cant make a intake fan in the front
Posted: Sat Apr 27, 2002 2:06 am
by Ken
Originally posted by tHE_0ne
my exhast fan is small
and i cant make a intake fan in the front
Could you put one in the floor? Then you would reverse the top fan to blow out. This should give you a very good air exchange...
Just an idea...
Posted: Sat Apr 27, 2002 12:50 pm
by RoundEye
Can you post a real pic of the case, or give us a link to who makes the case?
Posted: Sat Apr 27, 2002 1:31 pm
by DiskDoc
Originally posted by exit1mile
I would try then turning the fans around and make the top 120mm an exhaust and the back fan an intake.
that wouldn't work out too well because the back of the comp is always hot. PSU blows out hot air from the back and if a fan was to intake air from the back, it wouldn't be any cooler than the one that'd intake from the top. infact, the one that intakes from the top would be cooler
here's an idea. have a rubber tube intake cool air from an open AC vent in your room.. that'd suck in cooler air.. lolz!! I'm j/k but not a bad idea what u think? lol
Posted: Sat Apr 27, 2002 6:22 pm
by tHE_0ne
here's an idea. have a rubber tube intake cool air from an open AC vent in your room.. that'd suck in cooler air.. lolz!! I'm j/k but not a bad idea what u think? lol
Ghetto Mod
, than somehow the heat gets turned on and your cpu frys
this is thr only pics i found of my case, once i get my friends camera ill take some pictures.
Posted: Mon Apr 29, 2002 12:18 pm
by LT-73
How about a drive bay cooler? or right below the plexi on the right bottom corner. You might have to get a mid size fan with at least 60cfm or better or like ken sugessted put one on the floor maybe a 120m and have the top as an exhaust.
What the heck go for all three ! you'll definately get some serious airflow that way !
Posted: Mon Apr 29, 2002 4:07 pm
by YARDofSTUF
i'd give it a 2 out of 10
top blow hole should be pulling hot air out, heat rises its a given, u draw air from the grund
Posted: Mon Apr 29, 2002 4:15 pm
by YARDofSTUF
oh ur case is a Raidmax A228
Posted: Tue Apr 30, 2002 4:53 pm
by tHE_0ne
what about a single intake from the side (by the pci slot)
I could make a hole in the window and add a fan