How to connect 2 adsl router together?
How to connect 2 adsl router together?
Hey guys, anyone of u know how to connect 2 dlink rounter (DSL-504T) through the adsl port(that uses traditional 2-wire copper telephone lines to connect)? each of the adsl have a lan network. the purpose of this is to connect both lan network where is far from each other,(normal twisted wire can only go up to 100meter) may take up to 3km.
The problems that i have is i dunno how to configure to create a connection between this 2 routers. From what i know is we need to have a computer server to connect both rounters. can anyone help me with this? or any suggestion? urgent!!!
thanks
The problems that i have is i dunno how to configure to create a connection between this 2 routers. From what i know is we need to have a computer server to connect both rounters. can anyone help me with this? or any suggestion? urgent!!!
thanks
- YeOldeStonecat
- SG VIP
- Posts: 51171
- Joined: Mon Jan 15, 2001 12:00 pm
- Location: Somewhere along the shoreline in New England
Is you goal to create a VPN tunnel between two locations? Such as two business locations that need to communicate with each other? Because after checking on your model router, the DSL-504T does not support "router to router VPN tunnels".
What needs are there for the two networks to communicate with each other? There might be a better solution than a VPN WAN.
What needs are there for the two networks to communicate with each other? There might be a better solution than a VPN WAN.
MORNING WOOD Lumber Company
Guinness for Strength!!!
Guinness for Strength!!!
actually both network is not pcs... is actually a few devices that using twisted cable(cat5). it does't connect to the internet, can create a VPN. All the devices wil connect to a switch-dslrouter. Then what i need to do is to connect both network together so that it can communicate with each other.
thanks
thanks
yes.. two adsl modem is located at 2 different places. i think is hard to join both router together. My main aim is to join the 2 network together using telephone line(coz it can go up to 2 kms long). anyway, u got any suggestion to join from a cat5 cable to a telephone line? as cat5 cable have distance limitation. thanks
Ok, you won't be able to do this with these specific routers and without purchasing a WAN service from the phone company. Your best bet is to use VPN over the Internet (both locations will need Internet access via the ADSL routers).bibiboy wrote:yes.. two adsl modem is located at 2 different places. i think is hard to join both router together. My main aim is to join the 2 network together using telephone line(coz it can go up to 2 kms long). anyway, u got any suggestion to join from a cat5 cable to a telephone line? as cat5 cable have distance limitation. thanks
- YeOldeStonecat
- SG VIP
- Posts: 51171
- Joined: Mon Jan 15, 2001 12:00 pm
- Location: Somewhere along the shoreline in New England
You'll have to purchase some sort of connection for each site to do a "site to site VPN" over...be it DSL, or Cable, or some flavor of fractional T-1. You don't have to provide internet access to your users if you don't want to, but if you want to connect the two locations...you're going to have to pay for that "in between stuff" somehow.bibiboy wrote:Any devices or way that i can connect both network without internet access? i need to run it under tcp/ip protocol.
thanks
MORNING WOOD Lumber Company
Guinness for Strength!!!
Guinness for Strength!!!
Dont use adsl
Use GSHDSL Modem
U can use atrie modem . it act like a wire and superb.....
U can use atrie modem . it act like a wire and superb.....
How to connect 2 dsl.
each of the adsl have a lan network. the purpose of this is to connect both lan network where is far from each other,(normal twisted wire can only go up to 100meter) may take up to 3km.
The problems that i have is i dunno how to configure to create a connection between this 2 routers. From what i know is we need to have a computer server to connect both rounters.
The problems that i have is i dunno how to configure to create a connection between this 2 routers. From what i know is we need to have a computer server to connect both rounters.