i have been sitting hear for ages tryna get this router running, now can someone gimme step by step details how to get it running. i need massivehelp hear. first time tryna run a router.
Cheers
how do u setup up the friggen Netgear RT314 router
-
YeOldeStonecat
- SG VIP
- Posts: 51171
- Joined: Mon Jan 15, 2001 12:00 pm
- Location: Somewhere along the shoreline in New England
Didn't come with the directions?
Make sure the TCP/IP bound to your network card on your computer it set to "Obtain IP address Automatically", gateway is left blank, WINS is disabled, and DNS is disabled. Have your computer plugged into one of the free ports of the switch on back of the router. Reboot. Then make sure your web browser is set to use LAN withOUT Proxy for it's connection. Log onto the routers admin page by entering 192.168.0.1 in the address bar of IE. Log on using Admin for username, and 1234 I think is the default password. Or 123, or 12345 I forget. Anyways, you then will be walked through the easy configuration wizard to setup your account, be it DSL or Cable. Once it's connected, reboot your computer another time and your off.
Make sure the TCP/IP bound to your network card on your computer it set to "Obtain IP address Automatically", gateway is left blank, WINS is disabled, and DNS is disabled. Have your computer plugged into one of the free ports of the switch on back of the router. Reboot. Then make sure your web browser is set to use LAN withOUT Proxy for it's connection. Log onto the routers admin page by entering 192.168.0.1 in the address bar of IE. Log on using Admin for username, and 1234 I think is the default password. Or 123, or 12345 I forget. Anyways, you then will be walked through the easy configuration wizard to setup your account, be it DSL or Cable. Once it's connected, reboot your computer another time and your off.
MORNING WOOD Lumber Company
Guinness for Strength!!!
Guinness for Strength!!!
Need More info
What kind of ISP are you on? Cable, DSL?
Ive had both on my 314 so I might be of some help in that area.
Ive had both on my 314 so I might be of some help in that area.
Netgear router is pretty simple to set up. Need to know what kind of service cable, DSL. Static or DHCP IP. It would also be nice if we knew what OS's the systems were using. And just for grins you may want to call your ISP and ask them things like Default gateway and DNS address's.
Now to get into the web based configuration you need to open up IE(or what ever browser your using) and in the address bar type
http://192.168.0.1 You can do this from any system connected to the router
logon is going to be "admin" and password is "1234"
Need the above info to go any further.
Now to get into the web based configuration you need to open up IE(or what ever browser your using) and in the address bar type
http://192.168.0.1 You can do this from any system connected to the router
logon is going to be "admin" and password is "1234"
Need the above info to go any further.
i had tryed that already but when ever i do that 192.168.0.1 thing it comes up all screwed you know when it cant find a page.
im also running win98 for the people that asked.
Anyway can i set it up manually in user friendly terms plz
im not too good on the network thing.
oh and its cable with static IP dont know if that helps.
Cheers
im also running win98 for the people that asked.
Anyway can i set it up manually in user friendly terms plz
im not too good on the network thing.oh and its cable with static IP dont know if that helps.
Cheers
The first thing your gonna do is get into the web based setup.
http://192.168.0.1
Now your going to go to the bottom of the screen where it says "domain name" and put in (mine is lvcablemodem.com). Click next then next again.
Now from the next menu select use fixed ip address
type what ever your address is in here IE:24.234.130.XXX
your isp gave you this address!!!
subnet mask 255.255.255.0
gateway is going to be .1 in other words it looks like this
24.234.130.1 notice the last bit .1
Now when it comes to DNS servers I perfer to put my ISP servers in manualy(thats why I asked you the DNS servers address).
Mine is 24.234.0.5 , 24.234.0.7(I have found that in most cases you need this info).
WIN mac address you can use defaults
Now in windows your going to get into network properties then double click on TCP/IP with your nic followed. gonna look kinda like this
TCP/IP 3com
double click on it and select ip address. make sure that is on obtain IP address automaticaly. then click on DNS and put your DNS address's in. under gatway put in 192.168.0.1
All the systems should be set to DHCP.
The router will take care of the rest.
If you have problems then write me or PM me and I will help
http://192.168.0.1
Now your going to go to the bottom of the screen where it says "domain name" and put in (mine is lvcablemodem.com). Click next then next again.
Now from the next menu select use fixed ip address
type what ever your address is in here IE:24.234.130.XXX
your isp gave you this address!!!
subnet mask 255.255.255.0
gateway is going to be .1 in other words it looks like this
24.234.130.1 notice the last bit .1
Now when it comes to DNS servers I perfer to put my ISP servers in manualy(thats why I asked you the DNS servers address).
Mine is 24.234.0.5 , 24.234.0.7(I have found that in most cases you need this info).
WIN mac address you can use defaults
Now in windows your going to get into network properties then double click on TCP/IP with your nic followed. gonna look kinda like this
TCP/IP 3com
double click on it and select ip address. make sure that is on obtain IP address automaticaly. then click on DNS and put your DNS address's in. under gatway put in 192.168.0.1
All the systems should be set to DHCP.
The router will take care of the rest.
If you have problems then write me or PM me and I will help