Here Ajax and Lobo Whats Up?

SSky11 · Post by **SSky11** » Mon Jun 18, 2001 1:34 pm

TCP options string = 0204058601010402

MTU = 1454
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.

MSS = 1414
Maximum useful data in each packet = 1414, which is equal to MSS.
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.

Default Receive Window (RWIN) = 8484
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 8484
RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
520352 (MSS x 46 * scale factor of 8)
260176 (MSS x 46 * scale factor of 4)
130088 (MSS x 46 * scale factor of 2)
65044 (MSS x 46)

bandwidth * delay product:
Your RcvWindow limits you to: 339.36 kbps (42.42 KBytes/s) @ 200ms
Your RcvWindow limits you to: 135.744 kbps (16.968 KBytes/s) @ 500ms
Consider increasing your RWIN value to optimize TCP/IP for broadband.

MTU Discovery (RFC1191) = ON

Time to live left = 113 hops
TTL value is ok.

Timestamps (RFC1323) = OFF

Selective Acknowledgements (RFC2018) = ON

IP type of service field (RFC1349)= 00000000

EvilAjax · Post by **EvilAjax** » Mon Jun 18, 2001 1:36 pm

What's this? Did you format?

Lobo · Post by **Lobo** » Mon Jun 18, 2001 1:36 pm

If you tryed to install our patch, read how to, as it is not in

SSky11 · Post by **SSky11** » Mon Jun 18, 2001 1:40 pm

yes a format, i have three computers at home and this one I had to format. Too many errors and games. Registry problems so I wanted to start out fresh. Ok let me get those patches in.

EvilAjax · Post by **EvilAjax** » Mon Jun 18, 2001 1:43 pm

You should know what to do. Still using WinPoet? If you forgot, just search for TunnelMode in your registry and set it to 0. If you can't connect then set it back to 1. Good luck.

BTW, that's to maximize your MTU's capacity to 1492.

SSky11 · Post by **SSky11** » Mon Jun 18, 2001 1:45 pm

Im using Enternet 300 1.4c. Should I still put tunnelmode to 0? And whats BTW again. Sorry, lol.

EvilAjax · Post by **EvilAjax** » Mon Jun 18, 2001 1:52 pm

BTW=By the way

You should have changed it prior to installation. It's in Lobo's help page. You have to change the MaxFrameSize to 1492 in the .inf files.

SSky11 · Post by **SSky11** » Mon Jun 18, 2001 2:14 pm

ok i notivced i can't edit anything i think i have the wrong version. I have the selfextracting one. I have the 1.41c evaluation. Is that the wrong one. I only have 30 days to use it.

EvilAjax · Post by **EvilAjax** » Mon Jun 18, 2001 2:28 pm

Hmm... go here and scroll all the way to the bottom and download Enternet 300 v1.41... NON-evaluating

To edit it, you must open up/switch WinZip to Classic Mode

Then you can edit the inf files

Let us know if you're still having problems.