some good settings?

syknesss · Post by **syknesss** » Tue Aug 23, 2005 4:24 pm

heres my current settings....

TCP options string = 020405340103030001010402
MTU = 1372
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput.
MSS = 1332
MSS is not fully optimized for broadband (although it might work well for slower connections). Consider increasing your MTU value.
Default Receive Window (RWIN) = 65268
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 65268

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
511488 (MSS x 48 * scale factor of 8)
255744 (MSS x 48 * scale factor of 4)
127872 (MSS x 48 * scale factor of 2)
63936 (MSS x 48)
bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 2610.72 kbps (326.34 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1044.288 kbps (130.536 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 54 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)

syknesss · Post by **syknesss** » Tue Aug 23, 2005 4:37 pm

my speed is supposed to be 8mb down 1 mb up

mccoffee · Post by **mccoffee** » Tue Aug 23, 2005 5:18 pm

your mtu is way way off are you on dsl or cable i forget

syknesss · Post by **syknesss** » Tue Aug 23, 2005 5:36 pm

comcast cable

i tryed using the patch from the site all was good but i tryed the optimizer a few mins later and my settings went back to the same whats up with that?

mccoffee · Post by **mccoffee** » Tue Aug 23, 2005 8:58 pm

Try thease in the sg optmizer below me to download and install

check - custom settings
network adapter selection -
check modify all adapters
maxmtu 1500
TTL - 64
TCP Receive 64240
MTU Discovery - yes
Black Hole Detect - no
Selective Acks - yes
Max Dup ACKs - 2
TCP 1323 nothing is checked

Other Settings tab:

Max Connections per Server - 10
Max Connections per 1.0 Server - 20
Lan Browsing Speedup - optimized

Then select "Apply Changes" and reboot to take effect.

VERY IMPORTANT TO DO THE FOLLOWING:

1. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need. For a stand alone pc all you need is Internet Protocol TCP/IP.

2. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.

3. ALWAYS connect your modem via ethernet (NIC) and make sure you have the latest drivers for your NIC from the manufacturer and set your duplex mode to "auto". If you are using a router make sure you have the latest firmware.

4. Clean out your temporary internet files with CrapCleaner.

5. Power cycle your modem i.e. unplug it for at least 15 seconds.

6. Download, update and scan with SpyBot S&D 1.4 EXACTLY as mnosteele has explained HERE & Ad-Aware SE 1.06 EXACTLY as mnosteele has explained HERE to remove any spyware then install and update SpywareBlaster 3.4 to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES. If these 2 programs find a lot of things then please post a HijackThis 1.99.1 log for us to look at.

7. Make sure you do the faster web page tweak in our Help & Tips page.

8. If you have Zone Alarm as a firewall uninstall it and search your pc for the left over files.

9. Install Kerio Personal Firewall 2.1.5, it's FREE and uses next to no resources.

10. Do a FREE online virus scan from Kaspersky Webscan, make sure to check the option to use the EXTENDED DATABASE.

11. Make sure you have ALL of the latest Windows Updates.

8) ;D

syknesss · Post by **syknesss** » Wed Aug 24, 2005 5:53 pm

new settings with what u suggested......isnt the duplex mode supposed to be 100full when using a router or am i wrong?

TCP options string = 020405b401010402
MTU = 1500
MTU is fully optimized for broadband.
MSS = 1460
Maximum useful data in each packet = 1460, which equals MSS.
Default Receive Window (RWIN) = 64240
RWIN Scaling (RFC1323) = 0 bits
Unscaled Receive Window = 64240

RWIN is a multiple of MSS
Other values for RWIN that might work well with your current MTU/MSS:
513920 (MSS x 44 * scale factor of 8)
256960 (MSS x 44 * scale factor of 4)
128480 (MSS x 44 * scale factor of 2)
bandwidth * delay product (Note this is not a speed test):

Your RcvWindow limits you to: 2569.6 kbps (321.2 KBytes/s) @ 200ms
Your RcvWindow limits you to: 1027.84 kbps (128.48 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 50 hops

TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)

syknesss · Post by **syknesss** » Wed Aug 24, 2005 5:55 pm

my connection seems to be slower now

mccoffee · Post by **mccoffee** » Wed Aug 24, 2005 8:59 pm

take a couple of speed test and show the resaults